Onkyo DV-BD507 instruction manual Connections, Connection to the TV, This unit

CONNECTIONS

Connection to the TV

•Make one of the following connections, depending on the capabilities of your existing device.

AUDIO CONNECTION

TV standard audio

VIDEO CONNECTION

	Method 1		Method 2	*1
standard picture		better picture

AUDIO / VIDEO CONNECTION

Method 3 *1, 2

best audio / picture

AUDIO IN		VIDEO	COMPONENT
R	L
		IN	VIDEO IN

Y (Green)

PB

(Blue)

HDMI IN

RCA audio cable

this unit and

	PR	(Red)
RCA
video	RCA
cable
	component
or			or
	video cable
		(Green)
		(Blue)
		(Red)

HDMI cable

	AUDIO OUTPUT	VIDEO OUTPUT	VIDEO OUTPUT	HDMI OUT
	(ANALOG L/R)	(VIDEO)	(COMPONENT)
*1	This unit is compatible with the progressive scan system. The feature provides you with the higher quality pictures
	than traditional output system does. To utilize this feature, a component or an HDMI connection is required. Refer
	to “HDMI Video Resolution” or “Component Output” setting on page 36 to set the video resolution.
*2	Analog audio connection is not required for this connection.

Supplied cables used in this connection are as follows:

•RCA audio cable (L/R) x 1

•RCA video cable x 1

Please purchase the rest of the necessary cables at your local store.

Note

•Connect this unit directly to the TV. If the RCA audio / video cables are connected to a VCR, pictures may be distorted due to the copy-protection system.

•If the picture is not output properly to the TV because of “HDMI Video Resolution” or “Component Output” setting, press and hold [PLAY B] on the front panel for more than 5 seconds. “HDMI Video Resolution” and “Component Output” setting will be reset to the default automatically. You cannot change the video resolution during Blu-ray Disc playback. To change the resolution, stop playback.

•A simple 1-cable connection with a device having an HDMI (high-definition multimedia interface) jack allows digital transfer of both digital video signals and multi-channel audio signals.

EN 13