FUNCTION SETUP
Setting items |
|
| Options |
| ||
Network Connection | Enable | Proxy | Do Not Use* |
| Set the proxy server. | |
| (Custom) | Setting |
|
|
| In most cases, you can connect |
| Use |
| Proxy | |||
|
|
|
| to the Internet without using | ||
|
|
|
|
| Address | |
|
|
|
|
| proxy server. | |
|
|
|
|
| Proxy Port | |
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| Connection | Auto* |
| Set the connection speed. | |
|
| Speed |
|
|
| In most cases, you can connect |
|
| 10BASE Half |
| |||
|
|
|
| to the Internet without making | ||
|
|
|
|
|
| |
|
|
| 10BASE Full |
| ||
|
|
|
| any changes to the default | ||
|
|
| 100BASE Half |
| setting. | |
|
|
|
|
|
| |
|
|
| 100BASE Full |
|
| |
|
|
|
|
|
| |
|
| Allow* |
| You can restrict Internet access | ||
|
| Setting |
|
|
| Limited Allow when |
|
| Limited Allow | ||||
|
|
| functions are used. | |||
|
|
|
|
|
| |
|
|
| Prohibit |
| ||
|
|
|
|
| ||
|
|
|
|
|
|
|
| Disable |
|
|
|
| Deactivate the network |
|
|
|
|
|
| connection. |
|
|
|
|
|
|
|
Software Upgrade | Current Version : |
|
|
|
| |
Allows you to upgrade this | Indicates the current firmware version. |
|
| |||
unit’s firmware. |
|
|
|
|
|
|
Disc Upgrade : |
|
|
|
| ||
Refer to page 48. |
|
|
|
| ||
Allows you upgrade this unit’s firmware using a disc. |
| |||||
|
| |||||
| Network Upgrade : |
|
|
|
| |
| You can upgrade the firmware version by connecting this unit to the Internet. |
*) Settings with (*) are the default.
•HDMI CEC allows integrated system control over HDMI and is part of the HDMI standard. In addition to Onkyo AV components, it allows interoperability with
•When “HDMI CEC” setting is set to “On”, functions listed below will be available.
Direct Change
When this unit is turned on, the TV also is turned on and the appropriate external input channel will be selected automatically. The appropriate external input channel can also be selected on your TV automatically when you press [PLAY B] when the unit’s power is on.
Standby
When you press and hold [ I /yON / STANDBY] on the front panel for 2 seconds, it turns off the power of the TV first and then turns off the power of this unit also.
System Information
Get & Set Menu Language
•The unit recognizes the OSD language set for the TV and automatically sets the same language as the player menu language (OSD menu language) for this unit.
•This feature is available only when “Auto(XXXX)” is selected in “Player Menu” in the setup menu. (Refer to “Player Menu” on page 35.)
Note
•HDMI CEC is available only when the display device is connected by an HDMI cable, and when it supports HDMI CEC feature.
44 | EN |