Onkyo DPS-5.5 instruction manual Using the Initial Settings menu, Digital Audio Out settings

Initial Settings menu

Using the Initial Settings menu

The Initial Settings menu gives you complete control in setting up your DVD player, including audio, and video output settings, audience limitation settings, among oth- ers.

If an option is grayed out it means that it cannot be changed at the current time. This is usually because a disc is playing. Stop the disc, then change the setting.

1	While playback is stopped, press
Setup	Setup and select “Initial Settings”
	from the on-screen display.
		HOME MENU
		DVD
	Audio Settings	Video Adjust
	Play Mode	Disc Navigator
	Initial Settings	Setup Navigator
2	Select the setup category from the

list on the left, then select an item from the menu list to the right.

3 Make the setting you want.

Note:

•The language options shown in the onscreen display illustrations on the following pages may not corre- spond to those available in your country or region.

Digital Audio Out settings

Digital Out

You only need to make this setting if you connected this player to an AV receiver (or other component) using one of the digital outputs.

■Default setting: On

Initial Settings
Digital Audio Out	Digital Out	On
Video Output	Dolby Digital Out	Off
Language	DTS Out
Display	96 kHz PCM Out
Options	MPEG Out

If at any time you need to switch off the digital audio output, set this to “Off”, otherwise leave it “On”.

Note that you can’t switch on/off the optical and coaxial outputs individually.

Dolby Digital Out

You only need to make this setting if you connected this player to an AV receiver (or other component) using one of the digital outputs.

■Default setting: Dolby Digital

Initial Settings
Digital Audio Out	Digital Out
		Dolby Digital
Video Output	Dolby Digital Out	Dolby Digital > PCM
Language	DTS Out
Display	96 kHz PCM Out
Options	MPEG Out

If your AV receiver (or other connected component) is Dolby Digital compatible, set to “Dolby Digital”, other- wise set to “Dolby Digital > PCM”.

DTS Out

You only need to make this setting if you connected this player to an AV receiver (or other component) using one of the digital outputs.

■Default setting: DTS

Initial Settings
Digital Audio Out	Digital Out	DTS
Video Output	Dolby Digital Out	Off
Language	DTS Out
Display	96 kHz PCM Out
Options	MPEG Out

If your AV receiver (or other connected component) has a built-in DTS decoder, set this to “DTS”, otherwise set to “Off”. Check the manual that came with the other component if you’re unsure whether it is DTS compati- ble.

Note:

•If you set to DTS with a non-DTS compatible ampli- fier, noise will be output when you play a DTS disc.

96kHz PCM Out

You only need to make this setting if you connected this player to an AV receiver (or other component) using one of the digital outputs.

■Default setting: 96 kHz > 48kHz

Initial Settings
Digital Audio Out	Digital Out
		96 kHz > 48kHz
Video Output	Dolby Digital Out	96 kHz
Language	DTS Out
Display	96 kHz PCM Out
Options	MPEG Out

If your AV receiver (or other connected component) is compatible with high sampling rates (96 kHz), set this to “96 kHz,” otherwise set it to “96 kHz > 48 kHz” (96 kHz audio is converted to a more compatible 48 kHz). Check the manual that came with the other component if you’re unsure whether it is 96 kHz compatible.

44