Onkyo DR-S2.2 Saving the adjusted values, Adjusting each speaker’s relative, Volume balance

Adjusting Each Speaker’s Relative Volume Balance Temporarily

You can readjust each speaker’s relative volume balance according to your preference while listening to the sound.

The adjusted values will return to the values set on page 33 when the DVD Receiver enters standby mode, or the main

power is switched off unless you save the values. Press MODE AUDIO first.

CH SEL

TEST TONE

UP/DOWN 5/∞

1

Remote controller

only

(Checking each speaker’s relative volume balance)

While playing the source, press CH SEL repeatedly.

Each press of the button changes the speaker which outputs the sound and the selected speaker appears in the display in the following order:

Left (Front left ch.)

↓

Center (Center ch.)

↓

Right (Front right ch.)

↓

Surr R (Surround right ch.)

↓

Surr L (Surround left ch.)

↓

Subwfr (Subwoofer)

↓

Speaker volume adjustment mode off

Note

Any speaker that is not included in the speaker

configuration on pages 29-31 is not selected

even if it is actually connected.

2	(Adjusting each speaker’s relative
	volume balance)

Press CH SEL repeatedly to select the speaker, then press UP/DOWN 5/∞ to adjust the volume level.

The volume level can be adjusted between –12dB and +12dB.

Repeat this step to change another speaker’s volume balance.

Saving the adjusted values

Remote controller Press TEST TONE. only

49