Playing a Test Sound | Silvercrest KH 6507 manual

IB_DVD_KH6507_GB.qxd 19.10.2004 9:53 Uhr Seite 20

2Initially, the left volume control for the front left speaker is selected. Press the up/down control but- tons to set the volume level between 10 and -10 dB.

3Then press the left/right control buttons to select the other speakers. The currently selected speaker is indicated at the bottom of the screen. Set the de- sired volume levels here as well.

4Once you have set the volume levels, press the OK button. The screen disappears.

ôNote:

If you are not certain which value is right for you, configure this setting from your listening position while playing a DVD/VCD/S-VCD. Test all the settings until you have found one that sounds best to you.

9.6.9.4. Playing a Test Sound

To test the audio settings for the playback of 5.1 channel surround sound, the DVD player has a test sound. To activate the test sound:

ôNote:

The test sound can only be activated if ...

Úin the Analog Output Setup Page, the submenu item Downmix is set to off

Úand no disc is inserted into the DVD player.

1Select the main menu item Audio Setup, then the submenu item SPEAKER SETUP.

2In the Analog Output Setup Page, select the submenu item Test Tone.

3Select the option On. Do not close the OSD menu while the test sound is playing. The test sound can be heard as a static on each of the connected speak- ers in turn. It is output to the audio channels in the order ...

ÚLeft (front left speaker)

ÚCenter (center speaker)

ÚRight (front right speaker)

ÚRight Surr (rear right speaker)

ÚLeft Surr (rear left speaker)

The audio channel that should currently be playing the test sound is indicated at the bottom of the OSD menu.

4To deactivate the test sound,select the option Off.

9.7. Activating the Screen Saver

ôNote:

The screen saver prevents images displayed for long periods from being burned into the television screen. When the screen saver is activated, it is automatically displayed as soon as …

ÚOSD menu is displayed on the screen for an ex- tended period of time and

Úno button is pressed on the remote control / DVD player during this time.

We recommend activating the screen saver. To do this:

1Select the main menu item General Setup Page and the submenu item Screen Saver.

2Select the option On to activate the screen saver. Select the option Off to deactivate the screen saver.

9.8.Activating the Automatic Memory Function

ôNote:

This function is not available for all discs!

The DVD player has an automatic

memory function. If it is activated, ...

Úthe DVD player "remembers" the last disc played.

Úthe DVD player saves the point at which playback of the disc was interrupted.

If the disc is inserted back into the DVD player, the playback is continued from the saved point.

To activate the automatic memory function:

1Select the main menu item General Setup Page and the submenu item Last Memory.

2Choose between the options On and Off.