IB_DVD_KH6507_GB.qxd 19.10.2004 9:53 Uhr Seite 21
10. Using the DVD Player
After you have …
Úset up the DVD player at a suitable location
Úconnected the DVD player to a television (or a video projector) using one of the described connection options
Úconnected the DVD player to a HiFi or surround sound system (analog/digital) or a Dolby Digital or DTS receiver, if desired
Úinserted the batteries into the remote control
Úand know how to access and use the setup menu with the remote control …
… the DVD player is ready for operation.
10.1. Inserting Discs
To play a disc with the DVD player:
1Switch on the television connected to the DVD player.
2Make certain that the DVD player is ready for operation and switched on.
If the television, the DVD player and any addition- ally connected equipment (e.g. an audio compo- nent) are ready for operation and switched on and the DVD player is correctly connected to the televi- sion, you will see the OPENING logo on the televi- sion screen.
If no disc is present in the disc tray of the DVD player: "No Disc" is displayed on the television screen.
3Open the disc tray by pressing the Open/Close but- ton once. "OPEN" is displayed on the television screen.
4Place a disc on the disc tray with the printed/label side facing up. For
5After you have placed the disc in the disc tray: Press the Open/Close button again to close the disc tray.
6The contents of the inserted disc are now loaded; this may take a few seconds. "Loading" is displayed on the television screen during this process.
10.2.Inserting Memory Cards with MP3/WMA/JPEG Files
To insert memory cards of types CF I/CF II, SD, MS/MSPro, MMC and SM into the DVD player:
1Switch on the television connected to the DVD player.
2Make certain that the DVD player is ready for op- eration and switched on.
If the television,the DVD player and any additionally con- nected equipment (e.g. an audio component) are ready for operation and switched on and the DVD player is correct- ly connected to the television,you will see the OPENING logo on the television screen.
If no disc is present in the disc tray of the DVD player: "No Disc" is displayed on the television screen.
3Open the flap in front of the memory card slot on the front side of the DVD player. To do this, press once with your finger on the dotted triangle on the flap. The flap opens.
4Now slide the memory card into one of the two memory card slots. Follow the steps below – depen- ding on which type of memory card you would like to play.
Upper slot
Lower slot
Fig. 14 Memory card slots
Warning!
Always be sure to insert the memory cards into the memory card slots as described below! Never bend the memory cards while inserting them into the memory cards slots! Only push the memory cards up to the stop in the memory card slot with a light pressure. If memory cards cannot be inserted without applying force:
ÚCheck whether it is a type of memory card that the DVD player can play. Only memory cards of types CF I/CF II, SD, MS/MSPro, MMC and SM can be played. Do not try to insert memory cards of other types into one of the memory card slots!
21