NAD T585 Rear Panel North American Version, IR in Jack, Digital OUT Coaxial Jack, Power on /OFF

Page 7

T585 Safety.qxd 3/23/2006 4:12 PM Page 7

Identification of Controls

REAR PANEL (NORTH AMERICAN VERSION)

1

IR IN Jack

10

HDMI OUT Jack (480/576, 720p, and 1080i video resolutions)

2

DIGITAL OUT COAXIAL Jack

11

VGA OUT Jack (480/576, 720p, and 1080i video resolutions)

3

DIGITAL OUT OPTICAL jack

12

AUTO TRIGGER ON/OFF Switch

4

MIXED AUDIO OUT (L & R) Jacks

13

+12V TRIGGER IN jack

5

5.1 CH AUDIO OUT FRONT L & R Jacks

14

Power cord socket

6

5.1 CH AUDIO OUT CENTER and SUBW (Subwoofer) Jacks

15

POWER ON/OFF

7

5.1 CH AUDIO OUT SURR (Surround Sound) L & R Jacks

16

RS 232 In/Out Jack

8S-VIDEO& Composite VIDEO OUT Jacks (480i/576i video resolutions)

9COMPONENT VIDEO OUT Jacks (480i/576i, 480p/576p, and 1080i video resolutions)

NOTES

Connect the optical digital cable (not supplied) firmly so that the configurations of both the cable and the connector match.

The +12V TRIGGER IN jack is a 3.5mm monotype miniature phone jack with the centre pin the 12V signal-sense. We recommend that you use a good quality cable with shield when attaching the 3.5mm monotype plug so as to prevent false triggering of the amplifier due to electro- magnetic interference from nearby electronic equipment. The +12V-IN TRIGGER allows you to have an external 12V signal to turn ON the NAD T585 from standby. This 12V signal must be a continuous 12V signal in order to keep the T585 in the ON state. Once you remove the 12V signal the T585 will return to standby. Check the specifications of the trigger input terminal the other components to ensure these are compatible with the T585. All 12V-TRIGGER inputs and outputs on other NAD components with a 12V-TRIGGER feature are fully compatible with the NAD T585’s 12V-TRIGGER IN. Before making any connections to any 12V-TRIGGER IN make sure all components are disconnected from the AC mains. If in doubt over the connections, installation and/or operation of the 12V-TRIGGER IN connection, consult your NAD dealer or sales representative. Failure to observe the above may result in damage to the NAD T585 and/or any ancillary components attached to it.

The IR IN jack is connected to the output of an IR (infrared) repeater (Xantech or similar), or the IR output of another component to allow control of the T585 from a remote location. Ask your dealer or custom installer for further details

SVENSKA PORTUGUÊS ITALIANO ESPAÑOL NEDERLANDS DEUTSCH FRANÇAIS ENGLISH

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents T585 Important Safety Instructions Important Safety InstructionsBlue Neutral Brown Live Important Information for UK CustomersTable of Contents Setup Display Window Front PanelPause button Digital OUT Coaxial Jack Power on /OFFRear Panel North American Version IR in JackRear Panel European Version Operation of the T585 with the Remote Control Preparing the Remote ControlOFF Remote ControlIdentification of Controls After Operation Operation of the T585Introduction Place a disc on the disc tray with the playback side downSpecial Playback Playing in SLOW-MOTION DVD, CD, VCD Scanning AT High Speed DVD, CD, VCDOSD Operation Operation Using Menu IconsDISPLAY/TITLES/MENUS/SUBTITLES Repeat Play Viewing from Another AnglePress Zoom during normal playback or pause Zoom FeatureStoring Markers in Memory RECALLING/CLEARING a MarkerClearing the Program Random Play CDProgram Play CD To resume normal playback, press RandomVCD Connecting to a MULTI-CHANNEL Sound System SACD/DVD-APlayback Audio with CD, VCD, SACD, and DVD CD/SACDTo Enjoy Dolby Digital Sound Connecting to a Surround Sound SystemDolby Digital Sound About Dolby Digital SoundWith a Receiver Equipped with a Dolby Digital Decoder Dolby PRO Logic Surround SoundTo Enjoy Digital Sound Channel Digital Stereo SoundTo Enjoy DTS Sound DTS SoundTo Enjoy Good Quality Sound Connecting to AN Analogue Stereo SystemNederlands Deutsch Français English Connecting to a TV DirectlySelecting Languages Initial Setup SettingsComponent = 576P Selecting Video TV Aspect and Picture ModeSelecting Scan Type Component = 480PSelecting Black Level Selecting Signal ModeSelecting Gamma Setting OptionsSelecting Contrast Level Selecting Brightness LevelSelecting Saturation Level Cvbs Selecting Video Adjustment OptionsHdmi VGAOn Storing Discs Selecting Digital Audio Output and Other SettingsOn Cleaning Discs On Handling DiscsRegion Management Information Playable DiscsDisc Mark Maximum playback timeCode Language Table of Languages and Their AbbreviationsSymptoms and Correction TroubleshootingSymptom Cause Correction Hdmi SpecificationsSuper Audio Compact Disc Sacd Copyright InformationDolby Laboratories Notice Digital Theater Systems NoticeVideo Output Scan Types North American Video Output Scan Types EuropeanAddendum High Resolution DVD-AUDIO Stereo 192KHZ 24-BIT DiscsDigital OUT Coaxial and Optical Verses Media Format T585 Safety.qxd 3/23/2006 413 PM T585 Manual 02/06
Top Page Image Contents