NAD T585 owner manual Channel Digital Stereo Sound, To Enjoy Digital Sound

T585 Safety.qxd 3/23/2006 4:12 PM Page 22

ENGLISH FRANÇAIS DEUTSCH NEDERLANDS ESPAÑOL ITALIANO PORTUGUÊS SVENSKA

Setup

CONNECTING TO A SURROUND SOUND SYSTEM

2 CHANNEL DIGITAL STEREO SOUND

You can enjoy the dynamic sound of 2 Channel Digital Stereo by connecting this DVD player to a receiver equipped with a digital audio input and speaker system (right and left front speakers).

From the DIGITAL OUT	75-Ohm coaxial cable	To the digital input of an amplifier equipped with either
		75-Ohm coaxial digital input or digital optical input.
(COAXIAL or OPTICAL) jacks	or optical cable
	S-VIDEO / Component / Composite
	75-Ohm coaxial or SCART cable
From S-VIDEO /		To S-VIDEO / Component /
Component Video /
		Composite or SCART
Composite or SCART
		inputs of the TV.

TV

TO ENJOY DIGITAL SOUND

You need to select from the OSD drop down menu, Audio, ‘Digital Audio Output’, and any of the ‘PCM’ settings, ‘96 kHz’ or ‘48 kHz’. If uncertain,leave the default ‘Steam/PCM’ and ‘48 kHz’ from the menu. (Refer to Initial Setup Settings, Audio)

NOTES

•Refer to the owner’s manual of your receiver as well.

•Before you connect the T585 to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections.

•Depending on your Digital sound decoder, the decode rate may be 96 or 48K.

•The output sound of the T585 has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening level. Otherwise, the speakers may be damaged by a sudden high volume sound.

•Turn off the receiver before you connect or disconnect the T585’s power cord. If you leave the receiver power on, the speakers may be damaged.

22