NAD T 531 owner manual Selecting Digital Audio Output

PAGE 22

INITIAL SETTINGS

SelectingDigitalAudioOutput

Each DVD disc has a variety of audio output	1
options. Set the player’s Digital Audio Output
according to the type of audio system you use.

POWER			OPEN/CLOSE
SETUP	REPEAT	A-B	RANDOM
AUDIO	SUBTITLE	ANGLE	SOUND

At the SETUP screen, press D/E to select Digital Audio Output and press G.

Disc Audio	DOLBY
	DIGITAL /PCM
Disc Subtitle	Stream/PCM
Disc Menu	PCM
Rating
Password
TV Aspect
Menu Language
Digital Audio Output
Others

TITLE MENU

2

Press D/E to select the desired output and press SELECT/ENTER.

1, 2	SELECT
	ENTER		Disc Audio	DOLBY
				DIGITAL /PCM
			Disc Subtitle	Stream/PCM
DISPLAY		RETURN	Disc Menu	PCM
			Rating
ZOOM	MARKER — SEARCH		Password
SCAN	PLAY	SKIP	TV Aspect
			Menu Language

STOP

PAUSE/STEP SLOW

Digital Audio Output

Others

1 2 3

4 5 6

7 8 9

CLEARPROGRAM

0

		OUTPUT
Playback
	Stream/PCM	Dolby Digital/	PCM only
Disc		PCM
96 kHz	PCM	PCM	PCM
Linear PCM
DVD
DTS DVD	DTS bit Stream	Not Output	Not Output
Dolby Digital	Dolby Digital	Dolby Digital	PCM
DVD	bit Stream	bit Stream
MPEG DVD	MPEG bit Stream	PCM	PCM
Audio CD	PCM	PCM	PCM
DTS Audio CD	DTS bit Stream	DTS bit Stream	DTS bit Stream

DOLBY DIGITAL/PCM: Select “DOLBY DIGITAL/PCM” if an active digital output is supplied to a Dolby Digital decoder, (or an amplifier or other equipment with Dolby Digital decoder). In this mode, the T 531 will automatically switch between Dolby Digital and Stereo PCM depending on the program encoded on the disc, with Dolby Digital given priori- ty. DTS is not possible with this setting.

Stream/PCM: Select “Stream/PCM” if an active digital output is supplied to an amplifier or other equipment with DTS decoder, Dolby Digital decoder and MPEG decoder.

PCM: Select “PCM” if an active digital output is

supplied to an amplifier or other equipment with linear PCM only (or MD recorder or DAT deck). 5.1 Surround Sound modes are not possible with this setting.

Notes

❍When you are not using the player’s digital audio output, don’t select any of the options.

❍If an active digital audio output signal is supplied to a receiver or other equipment without a corresponding digital decoding capa- bility, a very loud noise may be produced which could permanently damage the speakers.

❍The DTS DVD disc sound is played back only when the DVD

player is connected to a receiver with a DTS decoder.