NAD T 514DVD owner manual Initial Settings, Language Disc Language DVD-V, Menu Language

Page 13

INITIAL SETTINGS

You can set your own Personal Preferences on the player.

Initial Settings General Operation

1Press SETUP. The setup menu appears.

2Press to select the desired item. The screen will show the current setting for the selected item, as well as alternate setting(s).

3While the desired item is selected, press , then to select the desired setting.

4Press ENTER to confirm your selection. Some items require additional steps.

5Press SETUP, RTN, or PLAY to exit the setup menu.

LANGUAGE

DISC LANGUAGE DVD-V

Select a language for the disc’s Menu, Audio, and Subtitle. Original: The original language set for the disc is selected.

Other: To select another language, press number buttons to enter the corresponding 4-digit number according to the language code list on page 27. If you enter the wrong language code, press CLEAR.

MENU LANGUAGE

LANGUAGE

Menu Language

English

Disc Audio

Original

Disc Subtitle

Off

Disc Menu

Original

Move Select

Preparation

BEFORE OPERATION

DISPLAY

TV ASPECT DVD-V

4:3 Select when a standard 4:3 TV is connected. Displays theatrical images with masking bars above and below the picture (Display Mode: Widescreen)

16:9 Select when a 16:9 wide TV is connected.

Display Mode DVD-V

Panscan: Select when a conventional TV set is connected. The video material formatted in the Pan & Scan style is played back in that style (Both sides of the picture are cut off).

DISPLAY

TV Aspect

16 : 9

Display Mode

Widescreen

Progressive Scan

Off

Move Select

PROGRESSIVE SCAN DVD-V

Progressive Scan Video provides the highest quality pictures with less flickering. If you are using the COMPONENT VIDEO OUT/ PROGRESSIVE

DISPLAY

TV Aspect

Display Mode

Progressive Scan

On

Off

ESPAÑOL NEDERLANDS DEUTSCH FRANÇAIS ENGLISH

Select a language for the setup menu. This is the menu you see when you press SETUP.

Prev. Move Enter

Progressive Scan On was selected.

Press 'Enter' to confirm.

Enter Cancel

SCAN connectors, but are connecting the DVD Player to a standard (analog) television, set Progressive Scan to Off. If you are using the Component Video connectors for connection to a TV or monitor that is compatible with a progressive scan signal, set Progressive Scan to On.

CAUTION

Once the setting for progressive scan output is entered, an image will only be visible on a progressive scan compatible TV or monitor. If you set Progressive Scan to On in error, you must reset the unit. Press STOP to stop any disc that is playing. Next, press STOP again and hold it for five seconds before releasing it. The video output will be restored to the standard setting, and a picture will once again be visible on a conventional analog TV or monitor.

SVENSKA PORTUGUÊS ITALIANO

13

Image 13
Contents 514 Record Your Model Number NOW, While YOU can see IT Safety PrecautionsModel no Serial no Table of Contents Before USE When Setting UP the Unit Precautions for Handling the Unit When Shipping the UnitTo Keep the Exterior Surfaces Clean To Clean the Cabinet12V Trigger Rear PanelPlay OPEN/CLOSE Front Panel and Display WindowRemote Control Operation Range Remote ControlConnections Connecting to a TVVideo Connection Component Video Color Stream ConnectionDigital MULTI-CHANNEL Sound Connecting to Optional EquipmentGeneral Explanation Before OperationON-SCREEN Display ON-SCREEN Display OperationSound Items Track Number Time Audio ChannelLanguage Disc Language DVD-V Initial SettingsMenu Language Display TV Aspect DVD-VSample Frequency Audio Digital Audio OutputDynamic Range Compression DRC PBC OthersAuto Play DVD-V E. Black Level ExpansionChanging the 4-DIGIT Code Country Code DVD-VIf YOU Forget Your 4-DIGIT Code Operation with DVD and Video CD DVD Video Discs Repeat Chapter/Title/Off TipsDVD Audio Discs Repeat Track/Group/Off Video CDs Repeat Track/All/OffTitle Menu Special DVD Features Menus DVD-VDisc Menu Camera Angle DVD-VPlaying a DVD-VR Format Disc What is CPRM?Operation with Audio CD and MP3 / WMA Disc Random CD Operation with Audio CD and MP3 / WMA / Jpeg DiscRepeat A-B CD 3D Surround CDOperation with Jpeg Disc Programmed Playback VCD 2.0 VCD 1.1 CD Last Condition Memory DVD-V VCD 2.0 VCD Additional InformationScreen Saver Detailed Descriptions for Video ModesSymptom Cause Correction TroubleshootingCode Language Table of Languages and Their AbbreviationsCountry Code List Specifications T514 Manual AH Version 10/04