NAD L55 Before Calling Service Personnel, Symptoms and Correction, Symptom Cause Correction

Page 40

Reference

BEFORE CALLING SERVICE PERSONNEL

SYMPTOMS AND CORRECTION

Check the following guide for the possible cause of a problem before contacting service.

SYMPTOM

CAUSE

CORRECTION

 

 

 

No power

• The power cord is disconnected

• Plug the power cord into the wall outlet

 

 

securely.

The power is on, but the DVD player does • No disc is inserted. not work.

Insert a disc (Check that the DVD or, audio CD indicator in the DVD display is lit).

No picture

• The TV is not set to receive DVD signal

 

output.

Select the appropriate video input mode on the TV so that the picture from the DVD player appears on the TV screen.

• The video cable is not connected securely.

Connect the video cable into the jacks securely.

• The connected TV power is turned off.

• Turn on the TV.

No sound

• The equipment connected with the audio

 

cable is not set to receive DVD signal

 

output.

Select the correct input mode of the audio receiver so you can listen to the sound from the DVD player.

The audio cables are not connected securely.

Connect the audio cable into the jacks securely.

The power of the equipment connected with the audio cable is turned off.

Turn on the equipment connected with the audio cable.

The Digital Audio Output is set to the wrong position.

Set the Digital Audio Output to the correct position, then turn on the DVD player again by pressing the POWER button.

The playback picture is poor

The disc is dirty.

Clean the disc.

 

 

 

 

 

The DVD player does not start playback

No disc is inserted.

Insert a disc (Check that the DVD, or audio

 

 

 

 

CD indicator in the DVD display is lit).

• An unplayable disc is inserted.

Insert a playable disc (Check the disc type, color system and Regional code).

GB

• The disc is placed upside down.

Place the disc with the playback side down.

• The disc is not placed within the guide.

Place the disc on the disc tray correctly inside the guide.

The disc is dirty.

Clean the disc.

 

 

 

 

A menu is on the TV screen.

Press the SETUP button to turn off the

 

 

 

menu screen.

• The Rating level is set.

Cancel the Rating function or change the rating level.

The remote control does not work properly.

• The remote control is not pointed at the

• Point the remote control at the remote

remote sensor of the DVD player.

sensor of the DVD player.

 

 

• The remote control is too far from the

• Operate the remote control within about

DVD player.

23 ft (7 m).

 

 

• There is an obstacle in the path of the

• Remove the obstacle.

remote control and the DVD player.

 

 

 

• The batteries in the remote control are

• Replace the batteries with new ones.

exhausted.

 

40

Image 40
Contents L55 Safety Precautions IntroductionFCC Notice FCC WarningTable of Contents Important Safety Instructions Introduction Precautions To Obtain a Clear PictureOn Handling Discs On Cleaning DiscsOn Storing Discs Front Panel Identification of ControlsDisplay Window USA/CANADA Version Rear Panel European VersionOptical Digital Audio OUT Jack Remote Control Title ButtonDirectional Arrow Buttons Menu ButtonPreparing the Remote Control Open the battery coverOperating with the Remote Control Close the coverConnecting to a TV InstallationConnect the DVD Player to Your TV Connecting to AN Audio System Enjoying Dolby Digital Sound Connecting to Optional Audio SystemDolby Digital Enjoying Dolby PRO Logic Surround Sound With a Receiver Equipped with Dolby DigitalEnjoying 2 Channel Digital Stereo Sound Enjoying DTS SoundWhen a Menu Screen Appears on the TV Screen Basic OperationBasic Playback PreparationsAfter Operation Stopping Play Resume PlayStill Picture Pause Frame Advance DVD onlyVarious Speed Playback To Play in SLOW-MOTIONTo return to normal playback, press Play button To Scan AT Fast Forward or Fast ReverseOperation Using Display Menu Icons Common ProceduresGeneral Information about Display Menu Icons Examples of Display Menu IconsDetailed Description of Each Display Menu Icon Press Display During PlaybackFunction Selection MethodUsing a DVD Menu Using a Title MenuAdvanced Operation Changing Audio Soundtrack Language Changing Subtitle LanguageDVD Viewing from Another Angle Producing a 3D Surround EffectPress Angle repeatedly until the desired angle is selected Press repeatedly until the desired sound is selectedRepeat Play To return to normal playZoom Feature Press Zoom during normal playback or still playbackMemorizing Settings for Viewed Dvds Condition Memory You can memorize details for the following six settingsProgram Play Press Program during playback or stop mode. The programAfter playback of all programmed tracks Clearing the ProgramInitial Settings Common Procedures of Initial SettingsCommon Procedures of Initial Settings Press to select the desired item. The screen will showAt the setup screen, press to select Disc Audio and press Selecting Disc LanguagesPress to select the desired language and then press EnterSelecting Rating Level and Password At the Setup screen, press to select Rating and pressSelecting Rating Level DVD only Press to select the desired level and press EnterSetting Your Password DVD only Do not Forget Your PasswordTo CHANGE/CLEAR Memorized Password To Clear Your 4-DIGIT PasswordAt the Setup screen, press to select TV Aspect and press Selecting TV AspectSelecting Menu Language Selecting TV OutputPress to select the desired Language and press Enter Press to select the desired TV Output and press EnterAt the Setup screen, press to select Pseudo PAL Press Setting the TV SystemSelecting the Pseudo PAL EUR only Press to select the desired output and press Enter Selecting Digital Audio OUT Dolby DIGITAL/PCM STREAM/PCM PCMTable of Languages and Their Abbreviations Code LanguageReference Disc Requirements / Copyright InformationPlayable Discs Region Management InformationSymptoms and Correction Before Calling Service PersonnelSymptom Cause Correction Specifications Supplied AccessoriesDVD Player OutputsNAD Electronics International