NAD L55 owner manual Specifications, DVD Player, Outputs, Supplied Accessories

Page 41

DVD PLAYER

 

Power supply

AC 230V / 50 Hz (EUROPE), AC 110V/60Hz (USA / CANADA)

Power consumption

15 W

Mass

3.3 kg

External dimensions (W X H X D)

285 x 103x 291 mm

Signal system

PAL (EUR) , NTSC (USA / CANADA)

Laser

Semiconductor laser, wavelength 650 nm

Frequency range (audio)

4 Hz to 20 kHz

Signal-to-noise ratio (audio)

More than 100 dB (EIAJ)

Dynamic range (audio)

More than 95 dB (EIAJ)

Harmonic distortion (audio)

0.008 %

Wow and flutter

Below measurable level (less than + 0.001 % (W.PEAK) (EIAJ)

Operating conditions

Temperature: 41°F to 95°F, Operation status: Horizontal

OUTPUTS

 

Video output

1.0 V (p-p), 75, negative sync., RCA jack x 1

S-video output

(Y) 1.0 V (p-p), 75, negative sync., Mini DIN 4-pin x 1

 

(C) 0.286 V (p-p), 75

SCART video output

CVBS 1.0 V (p-p), 75, negative sync., RCA jack x 1

 

(RGB) 0.63 V (p-p), 75

Audio output (digital audio)

0.5 V (p-p), 75, RCA jack x 1

Audio output (optical audio)

Optical connector x 1

Audio output (analog audio)

2.0 Vrms(1 KHz, 0 dB), 330 , RCA jack (L, R) x 1

SUPPLIED ACCESSORIES

 

Video cable

1

Audio cable

1

NOTE

• Designs and specifications are subject to change without notice.

All rights reserved. No part of this publication may by reproduced, stored or transmitted in any from without the written permission of NAD Electronics International

Reference

SPECIFICATIONS

GB

41

Image 41
Contents L55 Introduction Safety PrecautionsFCC Notice FCC WarningTable of Contents Important Safety Instructions Introduction To Obtain a Clear Picture PrecautionsOn Storing Discs On Cleaning DiscsOn Handling Discs Display Window Identification of ControlsFront Panel Optical Digital Audio OUT Jack Rear Panel European VersionUSA/CANADA Version Title Button Remote ControlDirectional Arrow Buttons Menu ButtonOpen the battery cover Preparing the Remote ControlOperating with the Remote Control Close the coverConnect the DVD Player to Your TV InstallationConnecting to a TV Connecting to AN Audio System Dolby Digital Connecting to Optional Audio SystemEnjoying Dolby Digital Sound With a Receiver Equipped with Dolby Digital Enjoying Dolby PRO Logic Surround SoundEnjoying DTS Sound Enjoying 2 Channel Digital Stereo SoundBasic Operation When a Menu Screen Appears on the TV ScreenBasic Playback PreparationsAfter Operation Resume Play Stopping PlayStill Picture Pause Frame Advance DVD onlyTo Play in SLOW-MOTION Various Speed PlaybackTo return to normal playback, press Play button To Scan AT Fast Forward or Fast ReverseCommon Procedures Operation Using Display Menu IconsGeneral Information about Display Menu Icons Examples of Display Menu IconsPress Display During Playback Detailed Description of Each Display Menu IconFunction Selection MethodAdvanced Operation Using a Title MenuUsing a DVD Menu DVD Changing Subtitle LanguageChanging Audio Soundtrack Language Producing a 3D Surround Effect Viewing from Another AnglePress Angle repeatedly until the desired angle is selected Press repeatedly until the desired sound is selectedTo return to normal play Repeat PlayPress Zoom during normal playback or still playback Zoom FeatureYou can memorize details for the following six settings Memorizing Settings for Viewed Dvds Condition MemoryPress Program during playback or stop mode. The program Program PlayAfter playback of all programmed tracks Clearing the ProgramCommon Procedures of Initial Settings Initial SettingsCommon Procedures of Initial Settings Press to select the desired item. The screen will showSelecting Disc Languages At the setup screen, press to select Disc Audio and pressPress to select the desired language and then press EnterAt the Setup screen, press to select Rating and press Selecting Rating Level and PasswordSelecting Rating Level DVD only Press to select the desired level and press EnterDo not Forget Your Password Setting Your Password DVD onlyTo CHANGE/CLEAR Memorized Password To Clear Your 4-DIGIT PasswordSelecting TV Aspect At the Setup screen, press to select TV Aspect and pressSelecting TV Output Selecting Menu LanguagePress to select the desired Language and press Enter Press to select the desired TV Output and press EnterSetting the TV System At the Setup screen, press to select Pseudo PAL PressSelecting the Pseudo PAL EUR only Press to select the desired output and press EnterDolby DIGITAL/PCM Selecting Digital Audio OUTSTREAM/PCM PCMCode Language Table of Languages and Their AbbreviationsDisc Requirements / Copyright Information ReferencePlayable Discs Region Management InformationSymptom Cause Correction Before Calling Service PersonnelSymptoms and Correction Supplied Accessories SpecificationsDVD Player OutputsNAD Electronics International