Chapter 2 | Connections | |
:: Basic Connections | Antenna/Cable | |
The following connections are required in order to operate your DVD+VCR: |
| |
1 | Connect Antenna to DVD+VCR Connect the coaxial cable from your | DVD+VCR |
| antenna or cable TV jack to the IN (FROM ANT.) jack on the DVD+VCR back |
|
| panel. |
|
2 | Connect DVD+VCR to TV Choose either RF Out or Line Out: |
|
a. RF Out Use if you have an older television with only a basic antenna input: Connect the supplied coaxial cable from the OUT (TO TV) jack on the DVD+VCR back panel to the antenna in jack on your television.
b. Line Out Use for better sound and picture quality if your television has audio/video inputs: Connect the supplied audio/video cable from the LINE OUT jacks on the DVD+VCR back panel to the line in jacks on your television.
3Power on DVD+VCR & TV Plug the DVD+VCR power cord into a stan-
dard 120V/60Hz wall outlet, and turn on your television and DVD+VCR.
4 Select Channel 3 or Line If you used the RF Out connection, tune your television to channel 3. If you used the Line Out connection, set your television to its Line or Aux input.
• The Language/Langue/Idioma menu should appear on your
television screen. Please proceed with Auto Setup on page 15. |
|
• In order to view the setup menus, you MUST connect the |
|
DVD+VCR to your television with the RF or Line Out connec- |
|
tions, even if you plan to use the |
|
outputs. |
|
• If you are not getting a good picture, try changing the RF Out- | Television |
put to channel 4; see page 17. |
|
7
Advanced BasicSetup Connections Getting Features OperationsStarted
Help