Alternative Cable Box Connection
This connection method allows you to record from basic cable and watch scram- bled channels simultaneously. However, you will not be able to record scrambled channels.
1Connect incoming cable to DVD+VCR Connect a coaxial cable from your cable (CATV) or satellite wall outlet to the IN (FROM ANT.) jack on the back panel of the DVD+VCR.
2Connect DVD+VCR to cable box Connect a second coaxial cable from the OUT (TO TV) jack on the back panel of the DVD+VCR to the input jack on your cable box/satellite receiver.
3Connect cable box to TV Connect an additional coaxial cable from the output jack on the cable box/satellite receiver to the antenna in jack on your television.
4Power on DVD+VCR, TV & cable box Plug the DVD+VCR power cord into a standard 120V/60Hz wall outlet, and turn on your television, DVD+VCR and cable box/satellite receiver.
5Select Channel on TV & cable box Tune your television and cable box/satellite receiver to channel 3.
•The Language/Langue/Idioma menu should appear on your
television screen. Please proceed with Auto Setup on page 15.
• To watch the cable box, turn off the DVD+VCR, set your TV to channel 2, 3 or 4 (whichever channel is used by your cable sys- tem), and change channels on the cable box.
•To watch and record basic cable, select the channel to record on the DVD+VCR and the channel to watch on the cable box.
Incoming Signal
DVD+VCR
Cable Box/
Satellite Receiver
Television
13
Advanced BasicSetup Connections Getting Features OperationsStarted
Help