TVGuardian DRM-2001G manual One Touch Recording OTR, DV Controlled Recording

Page 21

Recording Mode

Recording Quality:

You can select from up to six record quality settings to define the picture quality of the recordings and the amount of space you want to use on the DVD/HDD. Higher quality recordings will consume more space and low quality recordings will consume less space on the DVD/HDD.

NOTE: Use the “ADD/CLEAR” button to switch between different record quality options.

Record Quality

Record Time

Recording Time

Video Quality

 

(4.7GB, DVD)

(80GB, HDD)

 

HQ (High Quality)

1 hour

17 hours

Best

SP (Standard Play)

2 hours

34 hours

Very good

SP+ (Standard Play)

2.5 hours

42 hours

Good

EP (Extended Play)

3 hours

51 hours

Normal

LP (Long Play)

4 hours

68 hours

Moderate

SLP (Super Long Play)

6 hours

102 hours

Low

 

 

 

 

One Touch Recording (OTR):

This function enables you to set up the timer during the recording process. Once the scheduled time is reached, the system will stop recording automatically.

1.Enter the “Recording Mode” and start recording.

2.For desired timer recording, press the “REC/OTR” button once or several times.

•The recording time will increase by 30 minutes with every pressing of the “REC/OTR” button.

•If the scheduled time exceeds the recordable time of the disc, normal recording mode will restore.

•If the timer recording is paused or stopped, the system will cancel the timer recording process.

DV Controlled Recording:

This unit can perform real-time monitoring and recording for a DV through the IEEE 1394 serial port (DV).

1.Connect the DV to the unit (for details, see “System Connection: System Connection for Recording External Signals”) by using the front panel inputs.

2.Switch on the power of the unit.

3.Press the “DV” button.

4.Switch on the “power” button of the DV, set it to the “CAMERA” mode, and start monitoring.

5.Press the “REC/OTR” button to start recording. (Other operations is the same as in the Recording Mode)

This unit can also record the VCR content of the DV.

1.The connection method is the same as stated in the first 3 steps of 1.

2.Switch on the “Power” button of the DV to enter the VCR status, and ensure the VCR status is “Stop”

3.Use the remote control to complete the operations of the DV, including STOP, PLAY, PAUSE, FB, FF, etc.

4.Press the “REC/OTR” button and then press the “PLAY” button to start recording.

5.During the recording process, press the “PAUSE” button to suspend recording of the unit, and press the button again to suspend the DV. To restore play of the DV, press the “PLAY” button; if you press the “REC/OTR” button, the play of the DV and the recording of the unit will resume at the same time; press the “FWD” or “REV” buttons to complete forward or rewind operation for the DV, while it reports Pause status to the unit; if you press the

“STOP” button, the recording of the unit will stop first, and press again to stop the play of the DV.

Notes:

•Do not move the unit or switch off the power during the recording process.

•The finalized DVD+R disc could not be recorded.

•Be sure to switch off the power of the unit and the DV before connecting the DV cables.

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents DVD Recorder with 80GB Hard Drive DRM-2001G User’s Manual Safety Instructions Table of Contents Identification of Controls Remote Control To install batteries and use remote control System Connections System Connections Connection for Recording External Signals Front Panel Signal System Setup Operation Interface and General StepsAuto Chapter Marker APS Auto Program Scan Recording QualitySetup Menu Video Modify ChannelTV Type Video Output Format TV DisplayVideo Output Close CaptionSetup MENU-AUDIO System Language Setup MENU-LANGUAGEAudio Language Subtitle LanguageDate-Time Setting Setup MENU-DATE/TIMEProgram Datedd/mm/yySetup MENU-PREFERENCES Reset to Factory DefaultScreen Saver Setup MENU-TIME Shift TVGuardian Feature Entering the recoding mode and menu description Recording ModeRecording modes Manual RecordingDV Controlled Recording One Touch Recording OTRRecord from hard drive to optical disc Instructions for Creating a YesDVD Setting up the input source Timer RecordingSetting up the recording quality Set up the recording modeSetting up the end time of recording Setting up the starting time of recordingSetting up the record title To delete a set timer recordingMenu Description Play ModeAuto Play Pre-Recorded Discs OperationEnter Title Before Playing Enter Menu Before PlayingNormal Play Play Mode ControlRepeat Play Program PlayPlayback Control Selection Play Mode Goto Button Audio SelectionAudio Channel Selection Subtitle Selection Multi-Angle SwitchPBC ON/OFF Picture Zoom FunctionHard Disc Drive Play Mode Hard Disc Drive PlaybackZoom Time Shifting Option SaveDisplay Disc Operation Entering the Disc Operation ModeLock Disc Rename DiscOverwrite Disc Record a New TitleFinalize Disc ExitEditing from the Hard Drive Hard Disc Drive EditingDelete SplitChanging the Index Picture SegmentRename LockProtect Editing Titles Title EditingEnter the Chapter Editing Mode Chapter EditingOperation Steps Selecting the title to be edited Splitting the title Setting the chapter markerHiding and un-hiding the chapter Indexing a pictureTroubleshooting Guide DVD, MPEG-II Technical SpecificationsTerm Definition Glossary of TermsGlossary of Terms
Top Page Image Contents