Arcam DV135 DVD Player: CR-515 Remote Control Manual

CR-515 remote control

The CR-515 is a remote control designed for use with Arcam DVD players. Some owners may wish to use a dedicated remote in preference to a Universal remote control.

On/Standby

This allows the DV135 to be put into and taken out of stand-by remotely.

DISP (display)

Press to cycle through the front panel display’s brightness options (dim to bright, off).

This button is not currently used.

Numeric keys

Gives direct access to individual tracks on audio CDs. For tracks greater than 9, enter the digits in sequence. For example, to play track 15, press 1, then 5, then OK.

SRCH (search)

Displays Search menu with Time, Title and Track options.

OPEN

Opens and closes the disc tray

Fast play and Skip chapter/tracks

Play fast (7 8) and Skip (0 /) chapters/tracks in both directions.

SETUP

Ensure no disc is playing and press SETUP to access the ‘Setup’ menu.

Press setup a second time to exit the setup menu.

Playback control

Pause (;), Play (4) and Stop (<).

Advanced controls

These buttons are described on the next page.

Remember to install the two AAA batteries

supplied before trying to

use your remote control.

DV135

E-8

�		��	��
�
�		�	�
�		�	�
�		�	�
��		�	��
��			��
		��
��			��
			��
��	��	��	��
��	��	��	��
��	��	��	��
	��

HDMI

Selects the picture resolution for HDMI output.

CLEAR

Use CLEAR to clear a numeric field.

Page Up/Down (DVD-audio)/

Slow play (other discs)

DVD-audio: Some DVD-audio discs allow the user to browse through images (photographs of the artist, lyrics, etc.) while music is being played. Use the 3 or 4 buttons to change to the previous/ next page. Note that this is not available on all DVD-audio discs.

Other discs: Press 3 or 4 on the remote control to play slow forward or backwards. Press the button repeatedly to cycle through the different speeds. To resume normal playback speed, press

PLAY.

Note that slow-play does not apply to audio CDs or DVD-audio discs.

STATUS

Press STATUS to give play status information about the current disc. Press STATUS again to close the status display.

The status information displayed varies depending on the type of disc – DVD, CD or VCD.

Navigation buttons

Arrow buttons allow navigation around the Basic and Advanced Set-up menus on the DV135. Confirm a selection by pressing OK.

Activates the DVD menu if available. Adds/Clears tracks to programme (not SACD).

MUTE

Press once to mute an Arcam amplifier. Press again (or use +/– volume) to un-mute.

Volume +/–

Adjusts the volume on Arcam remote-controllable amplifiers.

Note that the volume (+/–) controls and MUTE button have no effect on the audio output level of the DVD players.

If the infrared receiver (located on the right of the front-panel

window) is not ‘visible’ to the

remote control hand-set, then the

remote control will not work! Either

locate the unit differently, or take

advantage of the remote control

input on the rear of the player

(consult your dealer for further

information on this option).