Once the initial settings have been completed, the DVD recorder can always be operated under the same conditions whenever the power is switched on. These settings are called SETUP data that are easily modified and stored using the SETUP menu. The SETUP menu includes the information for Playback, Record, Language, Channel Scan.
Basic Operations
Press SETUP button during stop mode. And use
, 
, 
,
and ENTER button to navigate and select options. The current setting for any option is marked with a colored box.
1 | Press STOP button, if the disc is being | |
| ||
2 | played. | |
To call the SETUP menu, press SETUP | ||
| ||
3 | button. | |
Select the desired item by using or | ||
| ||
4 | button, then press ENTER button. | |
Select the desired sub item by using , , | ||
| ||
5 | , and ENTER button. | |
Press SETUP button after you have made all | ||
| ||
| settings. |
NOTE
•Depending on the disc, some setup menu selections may not work properly.
UsingtheSetupMenu
General
1 SCREEN SAVER
If a bright picture does not move for a long time, the TV may be damaged. If this state is continued on longer than 5 minutes, the screen saver works when ON is selected. The screen saver protects the CRT (Cathode Ray Tube) from damage by displaying a moving DVD logo continuously on the screen.
NOTE
•The monitor screen of a projector or projection TV is easily burned out if a static picture is displayed for a long time. Be careful not to allow the monitor screen to be burned out when you set the SCREEN SAVER mode to “OFF”.
2 COMPONENT OUTPUT
When viewing Progressive Scan TV via Y/Pb/Pr connector, set to “Progressive”.
3 EURO AV OUTPUT
Set to “YUV” to view in component video via Y/Pb/Pr connector. When using EURO AV connector RGB signal, set to “RGB”.
4 VIDEO OUTPUT FORMAT
Set up TV type according to type supported by your TV or monitor.
If your TV is for PAL, set to “PAL”. If your TV is for NTSC, set to “NTSC”.
5 FACTORY RESET
Returns the DVD Recorder back to factory default settings.
Using the Setup Menu 
35