H & B DRX-430 manual Problem

Page 43

Problem

AdditionalInformation

Solution

		• The remote control is too far from the player, or the angle with the remote
	The remote control doesn't seem to	sensor is too wide.
	work.	Use the remote within its operating range.
		• The batteries are exhausted. Put in new batteries.

		Some DVD discs do not output digital audio.
		• Switch your amplifier to the player's analog outputs.
		Dirt, dust, etc. on the disc.
		• Clean the disc.
		Interconnects are not fully inserted into the terminals (or are not connected).
		• Check that all interconnects are firmly inserted.
		Dirty or oxidized plugs/terminals.
		• Clean the plugs/terminals.
	No audio, or audio is distorted.	Incorrect audio cable connection.
		• Check the audio connections.
		Player's output is connected to the amplifier's phono (turntable) inputs.
		• Connect to any set of inputs except phono.
		The disc is paused.
		• Press (play) to exit the pause mode.
		Incorrect amplifier settings.
		• Check that the volume is turned up ,that the speakers are on, the input function
		set correctly, etc.

		Incorrect Audio menu settings.
	The analog audio is OK, but there	• Make sure that the Digital Audio Out setting is set to RAW or LPCM.
	appears to be no digital audio signal.	Check that the RAW or LPCM settings are suitable for your amplifier
		-check the amp's instruction manual.

	Noticeable difference in DVD and CD	• DVDs and CDs use different recording methods. This is not a malfunction.
	volume.

		• If this unit is connected to a non-DTS compatible amplifier or decoder using a
		digital audio cable, please connect to a DTS compatible amplifier or decoder.
	No DTS audio output.	If you do not do this, noise will be output if you try and play a DTS disc.
	No DTS audio output.	• If this unit is connected to a DTS-compatible amplifier or decoder using a

		digital audio cable, check the amplifier settings, and that the cable is properly
		connected.

	The disc containing the MP3 tracks	• If the disc is a recordable CD, make sure that the disc is finalized.
	The disc containing the MP3 tracks	• Check that the track(s)are in the MPEG1 Audio Layer 3 format.
	won't play.
	won't play.	• Check that the sampling rate of the track(s)are 32 or 44.1 or 48kHz.


	Some MP3 tracks appear to be missing	• If a track name does not end in ".mp3" or ".MP3", this player will not recognize
	from a disc.	it as an MP3 track.

NOTE

•Static electricity or other external influences may cause malfunctioning of this unit. In this case, unplug the power cord and then plug back in. This will usually reset the unit for proper operation. If this does not correct the problem, please consult your nearest service center.

Additional Information 43

Image 43

Contents Page These labels can be found on the units rear panel PrecautionsImportantSafety Instructions TableofContents BeforeYouStart Putting the batteries in the remote controlUsing the remote control Keep in mind the following when using the remote controlAlso this can play MPEG4 disc Compatible DiscsThis unit can play DVD-R Discs recorded as DVD video format DVD+R or DVD+RW discFront Panel Controls&DisplayProgram DisplayAngle RotationRear Panel Remote Controller Unit Enter REC ModeEDIT-DISC EDIT-TITLESlow SetupTimer REC TV ModeConnection for Video Output Terminals ConnectionConnection for A/V Input Terminals Connection for Audio Output TerminalsConnection for DV in and USB Playing a DVD or VCD disc BasicPlaybackPlaying an Audio CD or MP3 disc Playing Jpeg files from USB memory Playing a Picture CDPlaying MPEG4 Movie Movie using , buttonLoad a MPEG4 disc Slow Forward DVD/VCD AdvancedPlaybackFast Forward/Backward Skip Forward/BackwardRepeat , 3 to build up a program list Load a Audio CD or MP3 discSelected track to the program list Button in the track listSelecting Subtitles DVD only OSD On Screen DisplayPress Display button again Repeating a Title, Chapter Selecting Audio Languages DVD onlyPress Audio button during playback Zoom Screen Repeat DVD onlyDirect Search DVD/VCD Switching the Camera Angle DVD onlyRecording OTR One touch Timer RecordingSimple recording Timer Recording Changing a setting Erasing a settingPress again REC button to continue Recording from a digital camcorderRename disc DVD+RW/DVD+R EditingPlay disc DVD+RW/DVD+R Press Enter button to erase Erase disc by using or buttonUsing , button Erase disc DVD+RW onlyRecord a new title DVD+RW/DVD+RLock disc DVD+RW only Overwrite disc DVD+RW onlyFinalize disc DVD+R only Edit title DVD+RW/DVD+R Play title DVD+RW/DVD+RErase title DVD+RW only Rename title DVD+RW/DVD+ROverwrite title DVD+RW only Basic Operations UsingtheSetupMenuGeneral TV Aspect Ratio Rating level by using orIt asks for the password PlaybackAuto Chapter Marker Default QualityRecord Digital Audio OutputLanguage Channel Scan Modify Channel Information Press Enter button after selecting Name by using or buttonTune the channel fine by pressing or button Channel Swapping ClockAdditionalInformation SpecificationsProblem Solution TroubleshootingProblem Distributor WARRANTYand