PROBLEMS
If it appears that your
been overlooked. Under no circumstances should you try to repair the player yourself; as this will invalidate the
warranty. Only qualified service personnel can remove the cover or service this player.
*When the unit is switched on the first time,
NO POWER
•Check if the on/off button on the front of the player is set to on.
•Check if power plug is properly connected.
•Check if there is power coming from the AC outlet by plugging in another appliance.
NO PICTURE
•Check if the TV is switched on.
•Select the correct AV input on the TV.
•Check the video connection.
•Check if channel selector is set to AV on the TV. (See your TV manual for instructions).
•When Progressive Scan is on, there is no video output signal from composite video output. In order to use Progressive Scan feature, you need to connect the TV and DVD player through the component video outputs.
•Press the
DISTORTED PICTURE
•Check the disc for fingerprints and clean with soft cloth, wiping from center to edge.
•Sometimes a small amount of picture distortion may appear. This is not a malfunction.
•The disc format does not match the
•Ensure that ONLY one video output is connected.
NO COLOR IN PICTURE
•The disc format is not according to the
•Ensure DVD player is not connected through VCR.
PICTURE INTERFERENCE
•Relocate the unit further away from possible interference or emission source (e.g. Radio, Power Amplifier, radiator etc.).
NO RETURN TO START-UP SCREEN WHEN
DISC IS REMOVED
•Check to see if the program requires another disc to be loaded.
•Reset by unplugging the player from the power, then connect the power again.
THE PLAYER DOES NOT RESPOND TO THE
REMOTE CONTROL
•Aim the remote control directly at the sensor on the front of the player.
•Avoid all obstacles which may interfere with the signal path.
•Inspect or replace the batteries.
NO SOUND
•Check audio connections.
•If using a
•Check that DTS digital out is selected in the Audio Menu if a DTS disc is played.
•Ensure there is a DTS decoder connected when selecting DTS.
•Clean the disc.
•Check if the disc is defective by trying another disc.
NO AUDIO AT DIGITAL OUTPUT
•Check the digital connections
•Check the Digital Out menu to make sure that the digital output is correctly set.
•Check if the audio format of the selected audio language matches your unit capabilities.
DISC CANNOT BE PLAYED
•Ensure disc is placed properly into the disc tray.
YOU HAVE FORGOTTEN THE PASSWORD
•When the disc loading tray is empty, press Number Key 7, Number Key 6, Number Key 4, Number Key 1 and Number 8 on Remote Control in order.
IMPROPER FUNCTIONING
•The normal function of the product may be disturbed by external interference. Just reset the product (disconnecting and reconnecting the power cord might be required to resume normal operation).
Page 25