INSTALLATION
Connecting Cable TV Systems to the TV/VCR, continued
2Connect one of the coaxial cables between the splitter and the input on the converter box.
3Connect a second coaxial cable between the output of the converter box and the “B” input on the RF (A/B) switch.
4Connect a third coaxial cable between the splitter and the “A” input on the RF (A/B) switch.
5Connect the fourth coaxial cable between the output on the RF (A/B) switch and the terminal on the TV/VCR’s back panel.
Choose the “A” position on the A/B switch to select all non- scrambled channels by remote control. Choose the “B” position on the A/B switch to select scrambled channels via the converter box. When using the “B” position, tune your TV/VCR to the output channel of the converter box (usually channel 3 or 4).
14CHAPTER TWO: INSTALLATION