TV OPERATION
Selecting the
Signal Source
The first step in programming your TV/VCR is to select the signal source of your antenna or cable TV system.
1Press MENU to display the menu.
2Press CH▼ until “Setup” is highlighted. Press VOL+.
Setup
TV/Line : TV
Air/Cable : Antenna
Auto Program
Add/Erase
Auto Clock Set
Language : English
▲▼ Move œ√Sel. 
Menu
3Press VOL– or VOL+ to select “Antenna,” “Cable STD,” “Cable HRC,” or “Cable IRC.”
✔If your TV/VCR is connected to an antenna, select “Antenna.” If you have cable TV, select “Cable STD,” “Cable HRC,” or “CABLE IRC,” depending on the type of cable system you have.
Programming
the Channels
Storing Channels in Memory
Your TV/VCR can automatically memorize all the channels you receive. Once they are in memory, you can use CH▲ and CH▼ to select channels without using the number buttons.
✔Before you can store channels in memory, you must have already selected the signal source. See “Selecting the Signal Source” on this page.
1Press MENU to display the menu.
2Press CH▼ until “Setup” is highlighted. Press VOL+.
Menu
Picture
Time Set
Setup
VCR Setup
Caption
▲▼ Move œ√Sel. 
Exit
3Press CH▼ until “Auto Program” is highlighted.
Setup
TV/Line : TV
Air/Cable : Antenna
Auto Program
Add/Erase
Auto Clock Set
Language : English
▲▼ Move œ√Sel. 
Menu
4Press VOL– or VOL+ button to begin automatic programming.
Auto Program
ANT 15
: Stop
The TV/VCR automatically cycles through all the channel numbers and places the available channels in memory. This takes two to three minutes.
✔Press MENU at any time to interrupt the programming process and return to normal viewing.
5When the programming process is complete, press CH▲ or CH▼ to scan the channels stored in the TV/VCR’s memory.
✔Occasionally the TV/VCR will miss an active channel if the signal is weak or if the channel is off the air when you start programming. Likewise, an unavailable channel may be included in memory if there are stray signals on that channel.
Adding and Erasing Channels in Memory
You can manually add or erase a channel from your TV/VCR’s memory.
CHAPTER THREE: TV OPERATION | 17 |