TV OPERATION
Setting the Sleep Timer | Using the On/Off Timer |
The sleep timer automatically turns off the TV/VCR at the time you select. This is convenient if you like to fall asleep with the television on.
1Press MENU to display the menu.
2Press CH▼ until “Time Set” is selected. Press VOL+.
Menu
Picture
Time Set
Setup
VCR Setup
Caption
▲▼ Move œ√Sel. 
Exit
3Press CH▼ until “Sleep” is selected.
4 Press VOL+ or VOL– to set the length of time you want the TV/VCR to remain on; off, 10, 20, 30, 60, 90, 120, 150, or 180 minutes.
Time Set |
|
Clock | 07:30pm |
On Time | 12:00pm Off |
Off Time | 12:00pm Off |
Sleep | 30 |
▲▼ Move œ√Sel. 
Menu
5Press MENU to exit the menu.
This timer turns the TV/VCR on or off at a specific time. You may set the on time, the off time, or both the on and the off time. Whatever you choose, you must turn the timer on after you set the on or off times.
1Press MENU to display the menu.
2Press CH▼ until “Time Set” is selected. Press VOL+.
Setting the on time
1Press CH▼ to select “On Time.”
2Press VOL+ to make the hour flash.
Time Set |
|
Clock | 07:30pm |
On Time | 07:00pm Off |
Off Time | 12:00pm Off |
Sleep | Off |
œ√Move ▲▼ Adj. 
Menu
3Press CH▲ or CH▼ to set the hour the set will turn on.
4Press VOL+ to make the minutes flash.
5Press CH▲ or CH▼ to set the minute the set will turn on.
6Press VOL+ to make the Off flash.
7Press CH▲ or CH▼ to set the timer to “ON.”
Setting the off time
1Press CH▼ to select “Off Time.”
2Press VOL+ to make the hour flash.
3Press CH▲ or CH▼ to set the hour the set will turn off.
4Press VOL+ to make the minutes flash.
5Press CH▲ or CH▼ to set the minute the set will turn off.
6Press VOL+ and CH▲ or CH▼ to set the timer “On”.
7Press MENU to exit the menu.
22CHAPTER THREE: TV OPERATION