OPERATING THE RECEIVER
1.1 Select Country
To
Select the country where broadcasting services are provided. After selecting the “Select Country” from the Installation Menu, the following screen will be displayed:
●Select the country which you are in.
You can select the value of ITALY, SPAIN, SWEDEN, UK, USER, BELGIUM, GERMAN, FINLAND, or FRANCE by using / key.
●After select option, press the OK key to choose the nation of broadcasting area to be served.
If you don’t want to save the changed, press EXIT key without OK key pressed.
Note : If national code is changed, all of saved programs will be deleted.
1.2 Auto Scanning
The sub menu “Auto Scanning” will enable download of the channels automatically from the preprogrammed load.
To download channels automatically:
●You can select the specified frequency between Start Frequency and End Frequency.
●Press the OK key.
Auto Scanning menu will be displayed.
All the channels in the list will be automatically downloaded.
OPERATING THE RECEIVER
1.3 Manual Scanning
To
After selecting the “Manual Scanning” from the Installation Menu, the following screen will be displayed:
●Select the Channel Number.
You can select the specified channel you want to find.
The followings are defined as a default, but optionally you can choose it.
Signal Status bar shows you if it is valid.
●Input the frequency of the channel you want to find.
●Select the bandwidth.
You can select the value of 6, 7 or 8 MHz.
●Select the Guard Interval Mode.
You can select the value of Auto, 1/32, 1/16, 1/8, or 1/4.
●Select the FFT (Fast Fourier Transform) Mode.
The value of AUTO, 2K and 8K is settings automatically.
●After select option, press the OK key to start the scanning process.
1.4 Reset to Factory Defaults
This is to restore the factory set values in case the user has encountered some problems after changing any values of channel data and others which may be in error.
At the request window, if you press the OK key, the receiver will be reset to factory default settings automatically.
Note : This cause your previous settings to be deleted!
GB
D i g i t a l | T e r r e s t r i a l | R e c e i v e r |