Connect the IDE cable into the E-IDE Interface connector on the back of your MagicDVD 16X Multi-Purpose DVD-ROM.
Connect the 40-pin IDE cable into the MagicDVD 16X Multi-Purpose DVD-ROM drive’s E-IDE connector. Make sure to align the red-lined edge of cable with Pin-1 of the IDE connector.
7Connect the Analog cable from your Sound Card to the Audio out connector on your MagicDVD 16X Multi-Purpose DVD-ROM (If necessary).
If you have a sound card or an audio interface card, use the audio cable to connect from the sound card audio port to the MagicDVD 16X Multi-Purpose DVD-ROM drive’s Analog Audio out connector located on the back panel.
8Secure the MagicDVD 16X Multi-Purpose DVD-ROM drive against the chassis of your computer.
Secure the MagicDVD 16X Multi-Purpose DVD-ROM drive using four screws included in the accessory pack.
9Re-attach the computer’s cover.
10Reconnect all power cords to the computer.
10
