Integra DPS-8.3 Connecting to a TV, Using the supplied audio/video connection cable

Page 15

Connecting

Connecting to a TV

Before connecting

• Refer also to the instruction manual of the TV.

• Connect the plugs securely.

When you connect the DVD Player to the TV, be sure to turn off the power and unplug both units from the mains before making any connections.

Connect the DVD Player to the TV directly. If you connect the DVD Player to a VCR, TV/VCR combination, or video selector, the playback picture may be distorted as DVD videos are copy protected.

Incomplete

Insert completely

Using the supplied audio/video connection cable

Using the supplied audio/video cable, make audio connections from the ANALOG OUTPUT CH 1 or

CH 2 L and R jacks to the corresponding audio input jacks on the TV. In the same manner, make video connection from the VIDEO OUTPUT VIDEO jack to the corresponding video input jack on the TV.

By making connections to a stereo system, you can improve the quality of the sound. Using an audio cable (not supplied), make audio connections from the ANALOG OUTPUT CH 1 or CH 2 L and R jacks to the corresponding jacks on the stereo component.

Note

Be sure to match the colors of the plugs on the cable with the corresponding jacks on the DVD Player and the TV: yellow for video, red for R (right) audio and white for L (left) audio.

If the TV audio is monaural, leave the red plug disconnected.

 

COMPONENT 1

S VIDEO

VIDEO

 

COMPONENT 2

 

Y

PB

PR

 

Y

PB

PR

VIDEO

OUTPUT

CH 1 CH 2 FRONT SURR 1 CENTER SURR 2

L

L

 

ANALOG

SURR

 

OUTPUT

 

1 1+2

DIGITAL

R

R

OUTPUT

SUB

OPTICAL

COAXIAL

WOOFER

Be sure to set the TV Aspect after connection using the Setup Navigator explained in “Setting Up the Player” starting on page 21 or the function setting menu explained in “Adjusting Audio and Video Settings” starting on page 46.

Stereo audio/video connection cable

To audio and video input

Video (Yellow)

L (White)

R (Red)

: Signal flow

 

 

RS-232

 

 

AC INLET

IR

12V

 

IN

TRIG-

SACD & DVD AUDIO/VIDEO PLAYER

 

GER

MODEL NO. DPS-8.3

 

OUT

 

OUT

 

DO NOT connect

 

REMOTE

the mains lead at

 

CONTROL

this time.

 

 

Notes

Connect the player’s video output directly to the television.

Since the player is compatible to analog copy protection there may be cases when recordings from the deck may be distorted during playback.

Progressive signals are not output from the players video or S1/S2 video output jack.

15

Image 15
Contents DPS-8.3 Table of Contents Avis Important SafeguardsSur les modèles dont la fiche est polarisee PrecautionsFor U.S. model For Canadian modelRecording Copyright PowerRegional Restriction Codes Region Number About This ManualAbout Video CDs Structure of the Disc ContentGetting Started Playable DiscsStoring Discs Cleaning DiscsMP3 compatibility information Handling DiscsFeatures/Supplied Accessories FeaturesSupplied Accessories Inserting the Batteries Using the Remote ControllerClose the battery compartment cover 30˚ Before You StartFront panel Index to Parts and ControlsDisplay Video Output Component 2 jacks Video Output Component 1 jacksVideo Output S Video jack Video Output Video jackRemote controller Operation buttons Index to Parts and Controls Before connecting Connecting to a TVConnecting Using the supplied audio/video connection cableConnecting to a TV Making component video connectionsMaking S-video connections Making a digital connection with the amplifier Audio connection cablesOptical fiber connection cable An amplifier with discrete 2 channel input Making discrete 5.1 channel Analog Output connectionsMaking discrete 2 channel Analog Output connections An amplifier withDPS-8.3 Setting the TV System Australian model only To exit the Setup Navigator Setting Up the PlayerUsing the Setup Navigator When setting up for the first timeSetting the type of analog audio connections Setting Up the PlayerSetting the OSD Language On-Screen Display Language Setting the TV screen sizeSetting compatibility with 96 kHz output Confirming the settingsTo change other player settings in the Setup screen menus Dolby PRO Logic Surround Various sound formats and sound effectsDolby Digital Surround DTS SurroundWhen an operation is prohibited Basic PlaybackPlaying SACDs, DVDs, Video CDs, CDs and MP3s To navigate a menu screen Getting Started Using Your DVD PlayerWhen a Menu Screen is Displayed To Open or Return to the DVD or Video CD Menu ScreenForward and Reverse Scanning Pausing PlaybackSwitching the Playback Speed Chapter Track Skip Forward/Skip BackStopping Playback and Switching Power Off Resuming Playback from where you stoppedViewing slow playback Still Frame/Slow PlayAdvanced Playback Viewing a still framePlaying bonus groups of DVD-Audio Search using the number buttonsWhen performing a Time Search To perform a direct title or chapter/trackNavigate using the following controls Using the MP3 NavigatorRepeat Play Repeating a Title, Group, Folder, Chapter or TrackRepeating a Specific Segment To stop random play Random PlayPlaying in Random Order To change titles, chapters, or tracks during random playProgramming DVDs Playing in a Favorite OrderProgramming MP3s Press Program to enter the MP3 Program screenUse the number buttons to enter a three-digit folder number Playing in a Favorite Order Programming SACDs, Video CDs, CDsAdditional programming options Press and hold Program for about 2 seconds To add a title/group/chapter/track to a programTo save a program in memory To erase a program saved in memoryPress Angle during playback Selecting the Camera AngleViewing from a Desired Camera Angle Multi-Angle To check whether or not a disc is recorded with anglesPress Audio repeatedly to select the desired language Changing the Audio Language Multi-Language FunctionSelecting a Subtitle Language Multi-Language Subtitles Changing Audio TypeResuming playback from where Last Memory was pressed Memorizing a Last Memory location to return to laterTo clear the Last Memory location Memorizing Settings for DVDs When a disc that has memorized settings is loadedErasing the recorded contents Player repeatedly Turning Off the Video Signal OutputSwitching the video signal off Press Video Circuit Off on the DVDPhones level Listening through HeadphonesListening through Headphones Adjusting the phones levelViewing Disc Information during while a disc is playing Viewing Disc InformationViewing Disc Information during while a disc is stopped Using Dimmer functionUsing the Setup Screen Menus Adjusting Audio and Video SettingsChanging to the Setup Screen Expert Menu Mode Settings Expert Factory settingBasic Dolby Digital Out Adjusting Audio and Video SettingsAdjusting the Dynamic Range of the Audio Soundtrack Setting the Audio 1 OptionsDigital Out Expert DTS OutLinear PCM Out Mpeg OutAudio Out Setting the Audio 2 OptionsSpeaker Setting Sacd Playback ExpertSettings Gain Settings ExpertSettings Fix Factory setting Variable Off Factory settingDifferences in screen sizes and DVD formats Setting the TV Screen SizeSettings 43 Letter Box Pan & Scan Wide Factory settingTurning the Screen Saver On and Off Expert Setting the Video 1 OptionsSwitching the S-Video Output Expert Component VideoMemory 1, Memory 2, and Memory Adjusting the Video QualitySelecting a preprogrammed setting ProfessionalUse the cursor button ∞ to select Video Setup and press PureCinema DVD-Video onlyPress Display Changing the Background of the Screen Setting the Video 2 OptionsSetting the Position of the On-screen Display Expert Turning the angle indicator on and off ExpertDeutsch Italiano Español Setting the Language OptionsSetting the On-screen Display OSD Language Selecting an audio language preferenceEnglish French German Italian Spanish Settings w/ Subtitle Language Factory settingSelecting a subtitle language preference Selecting a DVD menu language preferenceOff Assist Subtitle When Other is selectedSettings With Audio Selected Subtitle Factory setting Forcing subtitles to be displayed ExpertLanguage Code List Level Setting the Parental Lock LevelEntering the Password Press Enter to set the passwordPress Enter to set the new level Setting the Parental Lock LevelChanging the Password Setting the Country CodeGroup Playback Expert Country Code ListOther Settings Auto Disc Menu ExpertTo clear the Function Memory Memorizing Settings Function MemoryRecalling Memorized Settings Resetting the Player to System SettingsTo 15 cm RC-499DV Send/Learn Programming procedureOther remote control unit OthersIndicate that the command has Other remote control unit thatCorresponds to the command you Learn indicator flashes twice toErasing all the commands programmed under a Mode button Erasing the programmed command from one buttonRegister the Codes of Other Units Remote Controllers Operate other units with the registered codesErasing Registered codes Brand Remote Code Preset SettingsVCR Register the Codes of Other Units Remote ControllersDVD Player TroubleshootingTroubleshooting Symptoms Causes Remedies PagesTroubleshooting DVD Player Remote Controller Symptoms Causes Remedies Pages Outputs SpecificationsGeneral DVD PlayerMemo Onkyo U.S.A. Corporation

DPS-8.3 specifications

The Integra DPS-8.3 is a high-performance universal disc player that stands out in the realm of home audio and video equipment. Recognized for its robust construction and advanced technology, the DPS-8.3 delivers exceptional playback quality for various disc formats, including Blu-ray, DVD, DVD-Audio, and SACD. With its ability to handle high-resolution audio formats, this player caters to audiophiles and home theater enthusiasts alike.

One of the hallmark features of the DPS-8.3 is its impressive audio processing capabilities. It is equipped with premium Digital-to-Analog Converters (DACs) that ensure precise audio reproduction. The player supports high-resolution audio formats, including DSD and PCM, allowing users to experience music as it was intended by the artists. The DPS-8.3 also includes a variety of audio settings that can be customized, making it compatible with user preferences and different speaker systems.

In terms of video playback, the Integra DPS-8.3 provides stunning visuals thanks to its advanced video processing technologies. It supports 4K Upscaling, enhancing the resolution of standard Blu-ray and DVD content to 4K quality. This feature ensures that even older media can benefit from the latest in video technology, making it an ideal choice for those who appreciate high-definition displays.

The DPS-8.3 is designed with user convenience in mind. Its intuitive interface and remote control functionality allow for easy navigation through various discs and settings. Additionally, the unit features multiple audio and video outputs, including HDMI, coaxial, and optical connections, ensuring compatibility with a wide range of home theater systems.

Another noteworthy characteristic of the Integra DPS-8.3 is its build quality. The chassis is constructed to minimize vibration and interference, which can negatively impact audio performance. This attention to detail makes the player not only functional but also a robust component of any high-end audio system.

In conclusion, the Integra DPS-8.3 is a versatile and high-quality universal disc player that combines cutting-edge technology with user-friendly features. Its ability to handle multiple disc formats, along with its superior audio and video processing capabilities, makes it a perfect addition to any home entertainment setup. Whether for music or movies, the DPS-8.3 promises an immersive experience that satisfies even the most discerning audiophiles and cinephiles. With its blend of innovation, quality, and convenience, the Integra DPS-8.3 remains a top choice in the competitive landscape of multimedia players.