Samsung WS32V56VS8XXEC, WS28V55VS8XXEC, WS28V53NS8XXEC PAL-M Y/C Delay, NTSC-M YC Delay

		Alignment and Adjustments
4-8-2(C) VIDEO ADJUST 1
No.	OSD	Function	Remark
1	Red Cufoff	Adjusts the gain of red output of low light	Adjusts
2	Green Cutoff	Adjusts the gain of green output of low light.Fix this gain to 127.	Fix
3	Blue Cutoff	Adjusts the gain of blue output of low light.	Adjusts
4	Red Drive	Adjusts the gain of red output of high light.	Adjusts
5	Green Drive	Adjusts the gain of green output of high light. After “G2-Adjustment” and White	Fix
		Balance adjustments are complete,this data is fixed to 127..
6	Blue Drive	Adjusts the gain for blue output of high light.	Adjusts
7	Sub Bright	Adjust sub brightness level to set the low light luminance in Picture Standard mode.	Adjusts
		Adjusts sub contrast level to set the high light luminance in Pictue Standard mode.
8	Sub Contrast	Set the value of sub contrast to near 50. The user control “contrast” depends on this	Adjusts
		value.User contrast=[sub cont*2/100]If sub contrast data is 10, user contrast changes
		into 1/5step
9	Sub Color	Adjusts sub color level to set the gain for color in Picture Standard mode.	Fix
10	Sub Tint	Adjusts the sub tint level of NTSC color system.	Fix
11	BCL Threshold	Beam Current Limit threshold current if SENSE input used 0...-2048 BCL threshold	Fix
		current if RSW1 input used(max. ADC output ~2047))
12	BCL Gain	Beam Current Limit loop Gain	Fix
13	BCL Time	BCL time constant; 0 = off	Fix
14	BCL Time2	Teletext Contrast Level	Fix
15	BCL Bri Reduction	BCL Brighness Reduction	Fix
16	P.DK.YC Delay	PAL-D/K Y/C Delay	Fix
17	P.I.YC Delay	PAL-I Y/C Delay	Fix
18	P.L.YC Delay	PAL-L Y/C Delay	Fix
19	S.BG.YC Delay	SECAM-B/G Y/C Delay	Fix
20	S.DK.YC Delay	SECAM-D/K Y/C Delay	Fix
21	S.L.YC Delay	SECAM-L Y/C Delay	Fix
22	P.BG.YC Delay	PAL-B/G Y/C Delay	Fix
23	P.YC Delay	External PAL Y/C Delay	Fix
24	S.YC Delay	External SECAM Y/C Delay	Fix
25	N.YC Delay	External NTSC Y/C Delay	Fix
26	P.M.YC Delay	PAL-M Y/C DELAY	Fix
27	N.MYC Delay	NTSC-M YC DELAY	Fix

Note 4. Beam Control Limit Characteristic
beam
MIN
1.8mA
1.6mA	MAX
BCL GAIN
BCL THESHOLD
WDRGB
50	IRE

Samsung Electronics 4-11