Description-Rear Panel
SETUP
1 | 2 | 3 | 4 | 5 | 6 |
Rear Panel
1.DIGITAL AUDIO OUT JACKS
•Use either an optical or coaxial digital cable to connect to a compatible Dolby Digital receiver. Use to connect to an A/V Amplifier that contains a Dolby Digital or DTS decoder.
2.ANALOG AUDIO OUT JACKS
•Connect to the Audio input jacks of your television, audio/video receiver, or VCR.
3.VIDEO OUT JACK
•Use a video cable to connect to the Video input jack on your television.
4.
•Use the
5.COMPONENT VIDEO OUT JACKS
•Use these jacks if you have a TV with Component Video in jacks. These jacks provide Pr, Pb and Y video. Along with
6.VIDEO OUT SELECT SWITCH
•Use the switch to set video out.
•If Y, Pb or Pr is selected,
•If
NOTE
* Select the VIDEO OUT SELECT switch in the Stop or Power Off mode.
13