Setting Up the Language Features
Using the Subtitle Language
1.With the unit in Stop mode, press the MENU button.
2.Select Setup using UP/DOWN buttons, then press the RIGHT or ENTER button.
3.Select Language Setup using UP/DOWN buttons, then press the RIGHT or ENTER button.
4.Select Subtitle using UP/DOWN buttons, then press the RIGHT or ENTER button.
5.Use the UP/DOWN buttons to select the desired language.
-Select “Automatic” if you want the subtitle language to be the same as the language selected as the audio preference.
-Select “Others” if the language you want is not listed. Some discs may not contain the language you select as your initial language; in that case the disc will use its original language setting.
6.Press the ENTER button.
-The language is selected and the screen returns to Language Setup menu.
Note
•If the selected language is not recorded on the disc, the original
•How to make the SETUP menu disappear or return to menu screen during set up; Press RETURN or LEFT button.
Setting Up the Audio Options
1.With the unit in Stop mode, press the MENU button.
2.Select Setup using UP/DOWN buttons, then press the RIGHT or ENTER button.
3.Select Audio Setup using UP/DOWN buttons, then press the RIGHT or ENTER button.
4.Use the UP/DOWN buttons to select the desired item. Then press the RIGHT or ENTER button.
| AUDIO SETUP |
|
|
Dolby Digital Output | : PCM |
: PCM | |
DTS | : Off |
Dynamic Compression | : On |
PCM Down Sampling | : On |
Speaker Setup |
|
|
|
|
|
Dolby Digital Output
1.PCM : Converts to PCM(2CH) 48kHz audio. Select PCM when using the Analog Audio Outputs.
2.Bitstream : Converts to Dolby Digital Bitstream (5.1CH). Select Bitstream when using the Digital Audio Output.
Note Even when PCM Down sampling is Off
•Some discs will only output down sampled audio through the digital outputs.
•High sampling rate
•When playing LPCM or PPCM DVD protected by copyright. If digital audio source is 48KHz/16bit the Digital output is mute.
MPEG-2 Digital Out
1.PCM : Converts to PCM(2CH) audio. Select PCM when using the Analog Audio Outputs.
2.Bitstream : Converts to
Setting Up the Audio Options
DTS
1.Off : Doesn’t output digital signal.
2.On : Outputs DTS Bitstream via digital output only. Select DTS when connecting to a DTS Decoder.
Note There is no analog audio output when you play DTS sound disc.
Dynamic Compression
1.On : To select dynamic compression.
2.Off : To select the standard range.
PCM Down Sampling
1.On : Select this when the amplifier connected to the player is not 96KHz compatible. In this case, the 96KHz signals will be down converted to 48KHZ.
2.Off : Select this when the amplifier connected to the player is 96KHz compatible. In this case, all signals will be output without any changes.
Speaker Setup (See pages 33~34)
Note
•How to make the SETUP menu disappear or return to menu screen during set up; Press RETURN or LEFT button.
•Manufactured under license from Dolby Laboratories. “Dolby” and the
•“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
•DVD-AUDIO
-Outputs 2 channel digital audio only.
-Some
-MULTI channel
•SACD
Outputs analog signals only.
Surround Sound Speaker Setup
1.With the unit in Stop mode, press the MENU button.
2.Select Setup using UP/DOWN buttons, then press the RIGHT or ENTER button.
3.Select Audio Setup using UP/DOWN buttons, then press the RIGHT or ENTER button.
4.Use the UP/DOWN buttons to select Speaker Setup. Then press the RIGHT or ENTER button.
| AUDIO SETUP |
Dolby Digital Output | : PCM |
: PCM | |
DTS | : Off |
Dynamic Compression | : On |
PCM Down Sampling | : On |
Speaker Setup |
|
|
|
5.Use the UP/DOWN or LEFT/RIGHT buttons to select the desired item. Then press the ENTER button.
SPEAKER SETUP
On
|
|