Samsung DVD-HD748 manual Description-Front Panel Description-Rear Panel, Display Indicators

Description-Front Panel		Description-Rear Panel
6	7	1	7

STANDBY Pr Pb Y

					R	RAER	L	SUBWOOFER	COAXIAL	COMPONENT OUT
					OPTICAL							DVI OUT
					R	FRONT	L	CENTER	R AUDIO L	VIDEO	S-VIDEO
1	2	3	4	5	8	5.1CH ANALOG AUDIO OUT				OUT
Front Panel Controls					1		2		3	4	5	6
1. STANDBY/ON (	)		5. STOP (	)

•When the unit is first plugged in, the red indicator lights. When STANDBY/ON button is pressed on, the blue light appears and the player is turned on.

2.DISC TRAY

•Place the disc here.

3.OPEN/CLOSE ( )

•Press to open and close the disc tray.

4.DISPLAY

•Operation indicators are displayed here.

•Stops disc play.

6.SKIP ( ) / SEARCH

•Use to reverse skip a scene or music.

7.PLAY/PAUSE ( )

•Begin or pause disc play.

8.SKIP ( ) / SEARCH

•Use to forward skip a scene or music.

Rear Panel

1.DIGITAL AUDIO OUT JACKS

•Use an optical or coaxial digital cable to connect to a compatible Dolby Digital receiver.

Use to connect to an A/V Amplifier that contains a Dolby Digital, MPEG-2 or DTS decoder.

2.5.1CH ANALOG AUDIO OUT JACKS

•Connect to an amplifier with 5.1ch analog input jacks.

3.AUDIO OUT JACKS

•Connect to the Audio input jacks of your television, audio/video receiver.

7.COMPONENT OUT JACKS

•Use these jacks if you have a TV with Component Video in jacks. These jacks provide Pr, Pb and Y video.

•If Component (P-SCAN) & DVI Video Output is selected in Setup Menu, interlaced scan mode and Video, S-Video will not work.

•If Component (I-SCAN) Video Output is selected in Setup Menu, progressive scan and DVI mode will not work.

Display Indicators

1

23

Front Panel Display

1.Disc type indicators

2.Play / Pause / Forward play

3.Displays various messages concerning operations such as PLAY, STOP, LOAD ...

no DISC : No disc loaded.

OPEN : The disc tray is open.

LOAD : Player is loading disc information.

4.VIDEO OUT JACK

•Use a video cable to connect to the Video input jack on your television.

•The Video Output in Setup Menu must be set to Component (I-SCAN) or S-Video.

5.S-VIDEO OUT JACK

•Use the S-Video cable to connect this jack to the S-Video jack on your television for a higher quality picture.

•The Video Output in Setup Menu must be set to S-Video.

6.DVI OUT JACK

•Use the DVI cable to connect this jack to the DVI jack on your television for the best quality picture.

•The Video Output in Setup Menu must be set to Component (P-SCAN) & DVI.

Important Note

•Consult your TV User’s Manual to find out if your TV supports Progressive Scan. If Progressive Scan is supported, follow the TV User’s Manual’s instructions regarding Progressive Scan settings in the TV’s menu system.

•If Component(P-SCAN) & DVI Video Output is selected in Setup Menu, Video and S-Video will not work.

•See page 35 to get more information on how to use the setup menu.

ENG-6 ENG-7