Samsung CL29K40PQ, CL29K40MQ, CL29M40MQ manual Channel Name, Fields, where each field is a

Channel - Memorizing the Channels

Channel - FineTune

Setup -Time

Your TV can memorize and store all of the available channels for both “off-air” (antenna) and cable channels. After the available channels are memorized, use the CH and CH buttons to scan through the channels.

This eliminates the need to change channels by entering the channel digits. There are three steps for

The Fine Tuning function lets you manually adjust the TV’s tuner if you have difficulty tuning channels.

Adjust the fine tuning by pressing the œ or √ button.

	Fine Tune
3 ✽	1
	Reset
Move
Adjust	Return

◆ Clock

Setting the clock is

necessary in order to use

the various timer features

of the TV. Also, you can

check the time while

watching the TV. (Just

					Time
	Clock		-- : -- am
	Sleep Timer			: Off	√
	On Timer		-- : -- am Off
	Off Timer		-- : -- am Off
	On Timer Channel			:	3
	On Timer Volume			:	10
Move		Enter			Return

memorizing channels: “Air/Cable”, “Auto Program” and “Add/Delete”.

To store the fine tuning setting in the TV’s memory, press the MENU button.

press the INFO button.)

◆Air/Cable

Before your TV can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e., an antenna or a cable system).

		Channel
Air/Cable		Air
Auto Program		Cable
Add/Delete
Fine Tune
Name
LNA		: Off
Move	Enter	Return

To reset the fine tuning to “0”, select ”Reset” by pressing the ▲ or ▼ button, then press the ENTER button.

Channel - Name

Use this feature to assign an
		Name
easy-to-remember label to	… More
	2	: A

Select “Air” or “Cable” by pressing the … or † button.

any channel (i.e., “CBS”,	3	:	- - - -
	4	: - - - -
“ESPN”, “PBS2”, “CNN1”,	5	:	- - - -
	6	:	- - - -
etc.). A label consists of four	† More
fields, where each field is a

◆Auto Program

All available channels are automatically stored in memory when channels are selected by the direct tuning function.

Press the ENTER button at any time to interrupt the memorization process.

Search

Air 3

3%

Stop

Enter Return

Move	Adjust	Return
letter (A~Z), a number (0~9),

-, or a blank. When the INFO button is pressed, the channel label will appear next to the channel number.

Channel - LNA (depending on the model)

When a weak broadcast		Channel
signal causes an unclear,	Air/Cable	: Air
	Auto Program

◆ Sleep Timer

You can select a time period of between 30 and

180 minutes after which the TV automatically

switches to standby mode.

➢ Press the SLEEP button on the remote

control repeatedly until the appropriate time

interval appears (any of the preset values

from “30 Min.” to “180 Min.”).

◆ On Timer / Off Timer

You can set the On/Off timers so that the TV will

switch on or off automatically at the time you

select.

➢ You must set the clock first.

◆ On Timer Channel

The preferred channel can be set for when the

timer automatically turns on the TV.

◆ On Timer Volume

The preferred volume can be set for when the

timer automatically turns on the TV.

☛ Auto Power Off

When you set the timer “On”, the TV will

◆Add/Delete

You can add or delete a channel to display the channels you want only. To use the Add/Delete function, first run Auto Program.

Select “Deleted” or “Added” by pressing the … or † button.

Add/Delete

… More

2 : Deleted

3 : Added

4: Deleted

5: Deleted

6 : Deleted

†More

Move Enter Return

noisy picture, the “LNA”
		Add/Delete
feature improves the picture		Fine Tune
		Name
		LNA		:	Off
quality by setting to “On”. If
					On
you experience noise on a
	Move		Enter		Return
certain channel, set the

“LNA” to “On” or “Off” for this channel, to obtain the optimum picture.

eventually turn off, if no controls are operated for

3 hours after the TV was turned on by timer. This

function is only available in timer “On” mode and

prevents overheating or leakages, which may

occur if a TV is on for too long.

English - 4