Wegener Communications DVR396 manual Serial Port, DVR395 Serial Cables To Terminal or Printer

Page 15

VIDEO CONNECTIONS

Composite: connect the composite video output to the desired unit using a standard phono plug cable. The equipment it is connected to MUST have a 75-ohm termination.

S-video:connect the S-video output to the desired unit using a standard S-video mini- DIN connector.

AUDIO CONNECTIONS

Using standard shielded audio cable with phono plugs, connect the stereo audio output to the desired unit or equipment.

Serial Port

Using a cable terminated in an RJ-12 connector at one end and a DB9/DB25 at the other, connect the serial port to a terminal, printer, modem, or COMPEL control system.

A Null modem cable or adapter is required for use with a modem. Defaults are 19.2KBps, N, 8, in terminal mode.

Table 3. DVR395 Serial Cables To Terminal or Printer

	DVR395		COMPUTER			ASCII TERMINAL OR
						SERIAL PRINTER
	RJ-12		DB-9	(Female)		DB-25	(Male)
PIN		SIGNAL	PIN		SIGNAL	PIN	SIGNAL
2		TX DATA	2		RX DATA	3	RX DATA
3		RX DATA	3		TX DATA	2	TX DATA
5		GROUND	5		GROUND	7	GROUND
6		RI	9		RI	22	RI

MODE SWITCH

Set the control DIP switches for NTSC/PAL, Modulator channel 2/3, Normal Video, Color Bars, and LNB ON/OFF as required for your system. See Section 2.2 (Page 17) for DIP switch information. FUNCTIONS ARE MODEL SPECIFIC.

* * * CAUTION * * *

DO NOT CONNECT RJ-12 DIRECTLY TO PHONE LINE.

Page 15 of 30 DVR395/DVR396-002