Wegener Communications DVR395, DVR396 manual Section Setup, On Screen Display OSD

Page 23

SECTION 3

SETUP

3.1GENERAL

This section provides procedures for initial setup of the unit.

3.2ON SCREEN DISPLAY (OSD)

The OSD information is contained in the video output from the receiver. It is turned on by pressing either the <SELECT> or <ENTER> push-button on the front panel. The display is removed by selecting Exit from the Main Menu. When a menu is first shown, the cursor is always placed on its first action field (or action with edit field, which ever is first).

The OSD provides the following information and actions:

1.Carrier Status.

2.Signal Strength Monitoring.

3.Selecting the Perm Settings

4.Selecting the Serial Port device.

5.Software Version.

All menus are white text with a solid blue background with highlight as blue text on white background. There are four field types: Action, Action w/ Edit, Edit, Edit w/ Choices. The cursor can be moved only to these fields. The function of the <SELECT> and <ENTER> push- button for each field type is described below.

Table 7. SELECT And ENTER Key Functions

FIELD	SELECT	ENTER
Action Field	Moves cursor to next action field	Takes action on the current field.
	(or action w/ edit field, which
	ever is next). Wraps at end.
Action w/ Edit Field	Same as for action field.	Moves cursor to corresponding
		edit field.
Edit Field	If cursor is not on last digit within	Increments current digit within
	edit field, moves cursor to next	edit field. Wraps back to
	digit. Else, moves to next action	beginning at 9.
	field (or action w/ edit field,
	which ever is next)
Edit Field w/ Choices	Moves cursor to next action field	Scrolls through list of choices.
	(or action w/ edit field, which	Wraps back to beginning on last.
	ever is next).

Page 23 of 30 DVR395/DVR396-002