Wegener Communications DVR396 manual LED Indications Mode Condition Status LED, Red, Amber, Green

Page 20

Table 6. LED Indications

Mode	Condition	Status LED
Power Up	IRD is in process of powering up	RED/GREEN Blink Pattern
Boot Fail	EEPROM Boot Failure	RED
	Receiver Board Diagnostics Failure	RED
	Receiver Board Communications Failure	RED
	Secure micro / Host ID mismatch	RED
Alarm	Receiver Board Run-Time Failure	RED Blink w/ Count = 1
	In Fade Mode > 5 seconds (See Warnings Below.)	RED Blink w/ Count = 2
	Installation Mode > 5 seconds (See Warnings	RED Blink w/ Count = 3
	Below.)
	Carrier Table Search Mode	RED Blink w/ Count = 4
	Header Search Mode	RED Blink w/ Count = 5
	Satellite Search Mode	RED Blink w/ Count = 6
	Alarming Eb/No (and locked on carrier) (See	RED Blink w/ Count = 7
	Warnings Below.)
	No MPEG Data > 5 seconds (but locked on carrier)	RED Blink w/ Count = 8
	(See Warnings Below.)
	No Video Data > 5 seconds (but have MPEG data)	RED Blink w/ Count = 9
	(See Warnings Below.)
	NTSC - PAL mismatch.	RED Blink w/ Count = 10
	No Audio Program Table	RED Blink w/ Count = 11
Warning	Secure Micro Routine Failure	AMBER Blink w/ Count = 1
	Marginal Eb/No (and locked on carrier)	AMBER Blink w/ Count = 2
	COMPEL Required and No COMPEL within last 2	AMBER Blink w/ Count = 3
	minutes
	Audio Free Running	AMBER Blink w/ Count = 4
	No MPEG data < 5 seconds	AMBER
	No Video Data < 5 seconds	AMBER
	Fade or Installation Mode < 5 seconds	AMBER
Normal	Normal Mode for a COMPEL-not-Required Unit	GREEN
	COMPEL addressed within last 5 seconds	GREEN Flutter
	COMPEL addressed within last 2 minutes	GREEN

DVR395/DVR396-002 Page 20 of 30