Samsung DVD-E537K, DVD-E437K, DVD-E337K manual Using the Audio Language, Using the Subtitle Language

Setting Up the Language Features

Setting Up the Audio Options

Using the Audio Language
1 With the unit in Stop mode, press the MENU button.
			AUDIO LANGUAGE
Select Setup using UP/DOWN buttons, then RIGHT
2 or ENTER button.	Audio
Select Language Setup using UP/DOWN buttons,
		Original
3 then press the RIGHT or ENTER button.
		Others

4 Select Audio using UP/DOWN buttons, then press the RIGHT or ENTER button.

5 Press the UP/DOWN buttons to select ‘English’ .

-Select “Original” if you want the default soundtrack language to be the original language the disc is recorded in.

-Select “Others” if the language you want is not listed.

1 With the unit in Stop mode, press the MENU button.

2 Select Setup using UP/DOWN buttons, then RIGHT or ENTER button.

3 Select Audio Setup using UP/DOWN buttons, then press the RIGHT or ENTER button.

4 Use the UP/DOWN buttons to select the desired item. Then press the RIGHT or ENTER button.

Dolby Digital Out

1. PCM :

Converts to PCM(2CH) audio.

Select PCM when using the Analog Audio Outputs.

2. Bitstream :

Converts to Dolby Digital Bitstream (5.1CH).

Select Bitstream when using the Digital Audio Output.

	AUDIO SETUP
Dolby Digital Out	: PCM
MPEG-2 Digital Out	: PCM
DTS	: Off
Dynamic Compression	: On
PCM Down Sampling	: On
Multi Channel Output	: Digital
Speaker Setup

Press the ENTER button.
6 - English is selected and the screen returns to SETUP menu.
Using the Subtitle Language
1 With the unit in Stop mode, press the MENU button.
	SUBTITLE LANGUAGE
Select Setup using UP/DOWN buttons, then RIGHT		Automatic
2 or ENTER button.	Subtitle
Select Language Setup using UP/DOWN buttons,
3 then press the RIGHT or ENTER button.		Others

NOTE	• Be sure to select the correct Digital Output
	or no audio will be heard.	MPEG-2 Digital Out
	• When Multi Channel Output select Digital.	1. PCM :
	Dolby&MPEG-2 Digital Out works.

DTS	Converts to PCM(2CH) audio.
	Select PCM when using the Analog
1. Off : Doesn’t output digital signal.	Audio Outputs.
2. On : Outputs DTS Bitstream via digital output only.
	2. Bitstream :
Select DTS when connecting to a DTS Decoder.
	Converts to MPEG-2 Digital Bitstream
Dynamic Compression
	(5.1CH or 7.1CH).
1. On : To select dynamic compression.
	Select Bitstream when using the
2. Off : To select the standard range.
	Digital Audio Output.

PCM Down Sampling

1.On : Select this when the amplifier connected to the player is not 96KHz compatible. In this case, the 96KHz signals will be down converted to 48KHZ.

2.Off : Select this when the amplifier connected to the player is 96KHz compatible.

In this case, all signals will be output without any changes.

4 Select Subtitle using UP/DOWN buttons, then press the RIGHT or ENTER button.

Multi Channel Output (DVD-E537K only)

SETUP

1. Digital : Select this when using the multichannel digital audio output.

5 Use the UP/DOWN buttons to select ‘English’.	NOTE
- Select “Automatic” if you want the subtitle language to be the	• If the selected language is not
same as the language selected as the audio preference.
	recorded on the disc, the original
- Select “Others” if the language you want is not listed.
	pre-recorded language is selected.
Some discs may not contain the language you select as
your initial language; in that case the disc will use its	• How to make the SETUP menu

2. Analog : Select this when using the multichannel analog audio output. Speaker Setup (DVD-E537K only)

NOTE

CHANGING MENU

original language setting. disappear or return to menu screen

during set up; Press RETURN or

6	Press the ENTER button.	LEFT button.
	- English is selected and the screen returns to SETUP menu.

48

•How to make the SETUP menu disappear or return to menu screen during set up; Press RETURN or LEFT button.

•Manufactured under license from Dolby Laboratories.

“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

• “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc. 49