Description-Rear Panel
1 | 2 | 3 | 4 | 5 | 6 |
DVD-E337K/DVD-E437K
1 | 2 | 3 | 4 | 5 | 6 |
Description-Rear Panel
SETUP
Rear Panel
1.DIGITAL AUDIO OUT JACKS
•Use either an optical or coaxial digital cable to connect to a compatible Dolby Digital receiver. Use to connect to an A/V Amplifier that contains a Dolby Digital or DTS decoder.
2.ANALOG AUDIO OUT JACKS
•Connect to the Audio input jacks of your television, audio/video receiver.
3.VIDEO OUT JACKS
•Use a video cable to connect to the Video input jack on your television.
4.S-VIDEO OUT JACK
•Use the
5.COMPONENT VIDEO OUT JACKS
•Use these jacks if you have a TV with Component Video in jacks. These jacks provide Pr, Pb and Y video. Along with
The COMPONENT must be selected in the VIDEO OUT SELECT.
6.VIDEO OUT SELECT SWITCH
•Use the switch to set video out. If COMPONENT is selected,
NOTE |
* Select the VIDEO OUT SELECT switch in the Stop or Power Off mode.
12 | 13 |