Your DVD-ROM Drive
COMPACT |
1 | 2 | 3 | 4 | 5 | 6 |
1.Connector for stereo headphones with a 3.6 mm stereo
2.Headphone volume control
3.Indicator light (when it is green, a disc is being read or recorded)
4.Disc compartment (the compartment opens and closes automatically when you press the Eject button)
5.Emergency eject hole (if the compartment does not open when you press the Eject button, power off the computer, insert a pin or unfolded paper clip in the hole and push firmly)
6.Eject button
1 | 2 | 3 | 4 | 5 |
1.
2.
3.Master/slave select terminal
4.
5.
2
Upgrading the Firmware Flash Memory
The product firmware can be upgraded by downloading the updated file from the following Web site:
http://www.samsungelectronics.com
System Requirements
Before you install the
Item | Description |
Computer | Intel Pentium II (or higher), 32 MB of RAM (or higher) |
| with an IDE interface |
|
|
Free expansion unit | 5.25 inch |
|
|
Disk space | 100 MB minimum |
|
|
Windows version | Windows 95/98 OSR2 or Windows NT 4.0 (or higher) |
Playback of DVD Video | PC with Window95 OSR2 |
| |
| (MPEG2 card etc.) |
Installing the DVD-ROM Drive
To install your DVD-ROM drive in the PC, proceed as follows.
1 Make sure that the PC is powered off and disconnected from any power source.
2 If necessary, attach a horizontal bracket to both sides of the drive.
● Use of the brackets depends on your computer model; you can purchase these accessories separately from your computer dealer.
3 Remove the cover from a free expansion slot and install the
●If you have no free expansion slot, install the
drive in place of the diskette drive.
3