Samsung CL29Z7H, CL29Z6H, CL32Z7H, CL32Z6H, CL34Z7H, CL34Z6H manual Connecting Cable TV

Page 14

I N S T A L L AT I O N

Antennas with 75-ohm Round Leads

1

Plug the antenna lead into the VHF/UHF

terminal on the bottom of the back panel.

Separate VHF and UHF Antennas

If you have two separate antennas for your TV (one VHF and one UHF), you must combine the two antenna signals before connecting the antennas to the TV.

This procedure requires an optional combiner-adaptor (available at most electronics shops).

1

Connect both antenna leads to the combiner.

2

Plug the combiner into the VHF/UHF ter- minal on the bottom of the rear panel.

Connecting Cable TV

To connect to a cable TV system, follow the instructions below.

Cable without a Cable Box

1	▼	Because this TV is
	cable-ready, you do not need a
Plug the incoming cable	cable box to view unscrambled cable
into the VHF/UHF	channels.

antenna terminal on back of the TV.

2.2 CHAPTER TWO: INSTALLATION

Image 14

Contents Owner’s Instructions As an Energy Star Partner Thank You for Choosing Samsung Example Antenna Grounding Operation InstallationYour New TV Special Features TroubleshootingList of Features Chapter OneFamiliarizing Yourself with The TV ´ Video Input jack Side Panel JacksAudio Input jacks Super Video Input jackComponent 2 Input jacks 480i/480p/1080i Rear Panel JacksAUDIO-VIDEO Monitor Output jacks ´,¨,ˆVIDEO Input jack ´ Number buttons Remote Control Power +100¿ Sleep Remote Control ¯ Reset˘ Display ¸ VCR ControlsConnecting VHF and UHF Antennas Antennas with 300-ohm Flat Twin LeadsSeparate VHF and UHF Antennas Connecting Cable TVAntennas with 75-ohm Round Leads Cable without a Cable BoxConnecting to a Cable Box that Descrambles All Channels Connecting to a Cable Box that Descrambles Some ChannelsInstall AT I O N Connecting a VCR Unplug the cable or antenna from the back of the TVMake sure the jacks you are using are underneath the number Connecting an S-VHS VCRConnecting a DVD Player 480i/480p Connecting a Second VCR to Record from the TVConnecting a Digital TV Set-Top Box 480p/1080i Connecting a Camcorder Installing Batteries in the Remote Control Plug & Play Feature Turning the TV On and OffIf you want to reset this feature Viewing the Display Viewing the Menus and On-Screen DisplaysViewing the Menus Selecting a Menu Language Selecting the Video Signal-source Memorizing the ChannelsStoring Channels in Memory Automatic Method Adding and Erasing Channels Manual Method Press the VOL+ buttonAdjusting the Volume Changing ChannelsLabeling the Channels Setting the Clock Customizing the Picture Press the Menu button to display menuUsing Automatic Picture Settings Customizing the Sound Using Automatic Sound Settings Viewing an External Signal Source Press the CH button to select TV/AVCustomizing Your Remote Control Setting Up Your Remote Control to Operate Your VCR or DVDVCR Codes DVD CodesCodes Setting Up Your Remote Control to Operate Your Cable BoxCable Box Fine Tuning Channels LNA Low Noise Amplifier Alternate between On and OffTilt DNIeTM Digital Natural Image engine Digital Noise Reduction Changing the Screen Size CL32Z7H/CL32Z6HChanging the Color Tone Press the CH button to select Color ToneUsing the R.Surf Feature Freezing the PictureSetting the On/Off Timer Setting the Sleep Timer Press the VOL + button to select On/OffJust press the MTS button on the remote control Choosing a Multi-Channel Sound MTS SoundtrackBBE BBE Viewing Closed Captions Viewing Picture-in-Picture Activating Picture-in-PictureSelecting a Signal Source External A/V for PIP Press the VOL + button to select PIP OnChanging the Size of the PIP Window Swapping the Contents of the PIP image and Main image Changing the PIP Channel Viewing the Demonstration Identifying Problems Chapter FiveSpecifications Cleaning and Maintaining Your TVUsing Your TV in Another Country M O M O Appendix A.4