Samsung CL29Z7H, CL29Z6H, CL32Z7H, CL32Z6H, CL34Z7H, CL34Z6H manual

Page 15

I N S T A L L AT I O N

Connecting to a Cable Box that Descrambles All Channels

1

Find the cable that is con- nected to the ANTENNA OUT terminal on your cable box.

2

Connect the other end of this cable to the VHF/UHF antenna

terminal on the back of the TV.

▼	This terminal might be labeled

“ANT OUT,” “VHF OUT,” or simply, “OUT.”

Connecting to a Cable Box that Descrambles Some Channels

If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths of coaxial cable. (These items are available at most electronics stores.)

1

Find and disconnect the cable that is connected to the ANTENNA IN terminal on your

cable box.

▼	This terminal might be labeled

“ANT IN,” “VHF IN,” or simply, “IN.”

2

Connect this cable to a two-way splitter.

3

Connect a coaxial cable between an OUTPUT ter- minal on the splitter and the IN terminal on the cable box.

CHAPTER TWO: INSTALLATION 2.3

Image 15

Contents Owner’s Instructions As an Energy Star Partner Thank You for Choosing Samsung Example Antenna Grounding Installation Your New TVOperation Troubleshooting Special FeaturesChapter One List of FeaturesFamiliarizing Yourself with The TV Super Video Input jack Side Panel JacksAudio Input jacks ´ Video Input jack´,¨,ˆVIDEO Input jack Rear Panel JacksAUDIO-VIDEO Monitor Output jacks Component 2 Input jacks 480i/480p/1080i+100 Remote ControlPower ´ Number buttons ¸ VCR Controls Remote Control ¯ Reset ˘ Display ¿ SleepAntennas with 300-ohm Flat Twin Leads Connecting VHF and UHF AntennasCable without a Cable Box Connecting Cable TVAntennas with 75-ohm Round Leads Separate VHF and UHF AntennasConnecting to a Cable Box that Descrambles Some Channels Connecting to a Cable Box that Descrambles All ChannelsInstall AT I O N Unplug the cable or antenna from the back of the TV Connecting a VCRConnecting an S-VHS VCR Make sure the jacks you are using are underneath the numberConnecting a Second VCR to Record from the TV Connecting a DVD Player 480i/480pConnecting a Digital TV Set-Top Box 480p/1080i Connecting a Camcorder Installing Batteries in the Remote Control Turning the TV On and Off Plug & Play FeatureIf you want to reset this feature Viewing the Menus and On-Screen Displays Viewing the MenusViewing the Display Selecting a Menu Language Memorizing the Channels Selecting the Video Signal-sourceStoring Channels in Memory Automatic Method Press the VOL+ button Adding and Erasing Channels Manual MethodChanging Channels Adjusting the VolumeLabeling the Channels Setting the Clock Press the Menu button to display menu Customizing the PictureUsing Automatic Picture Settings Customizing the Sound Using Automatic Sound Settings Press the CH button to select TV/AV Viewing an External Signal SourceSetting Up Your Remote Control to Operate Your VCR or DVD Customizing Your Remote ControlDVD Codes VCR CodesSetting Up Your Remote Control to Operate Your Cable Box Cable BoxCodes Fine Tuning Channels Alternate between On and Off LNA Low Noise AmplifierTilt DNIeTM Digital Natural Image engine Digital Noise Reduction CL32Z7H/CL32Z6H Changing the Screen SizePress the CH button to select Color Tone Changing the Color ToneFreezing the Picture Using the R.Surf FeatureSetting the On/Off Timer Press the VOL + button to select On/Off Setting the Sleep TimerChoosing a Multi-Channel Sound MTS Soundtrack Just press the MTS button on the remote controlBBE BBE Viewing Closed Captions Activating Picture-in-Picture Viewing Picture-in-PicturePress the VOL + button to select PIP On Selecting a Signal Source External A/V for PIPChanging the Size of the PIP Window Swapping the Contents of the PIP image and Main image Changing the PIP Channel Viewing the Demonstration Chapter Five Identifying ProblemsCleaning and Maintaining Your TV Using Your TV in Another CountrySpecifications M O M O Appendix A.4