Samsung CL29Z7H, CL29Z6H, CL32Z7H, CL32Z6H, CL34Z7H, CL34Z6H manual Viewing the Menus

Page 25

O P E R AT I O N

Viewing the Menus and On-Screen Displays

Viewing the Menus

1

With the power on, press the MENU button.

The main menu appears on the screen. Its left side has five icons: Picture, Sound, Channel, Function and PIP.

The on-screen menus disappear

from the screen after thirty seconds.

2

Use the CH▲ and CH▼ buttons to highlight one of the 5 icons. Then press the VOL+ button to access the icon’s sub-menu.

3

Press the MENU button to exit.

Viewing the Display

You can also use the MENU,

CHANNEL, and VOLUME buttons on the control panel of the TV to make selections.

The display identifies the current channel and the status of certain audio-video settings.

1

Press the DISPLAY button on the remote control.

The on-screen display shows any or all of the fol- lowing: Active channel, the channel label, video source, the time, and the time remaining on the sleep timer.

(“*” indicates a channel has been manually fine tuned.)

The on-screen displays

disappear after ten seconds.

CHAPTER THREE: TV OPERATION 3.3

Image 25
Contents Owner’s Instructions As an Energy Star Partner Thank You for Choosing Samsung Example Antenna Grounding Your New TV InstallationOperation Troubleshooting Special FeaturesChapter One List of FeaturesFamiliarizing Yourself with The TV Audio Input jacks Side Panel Jacks´ Video Input jack Super Video Input jackAUDIO-VIDEO Monitor Output jacks Rear Panel JacksComponent 2 Input jacks 480i/480p/1080i ´,¨,ˆVIDEO Input jackPower Remote Control´ Number buttons +100˘ Display Remote Control ¯ Reset¿ Sleep ¸ VCR ControlsAntennas with 300-ohm Flat Twin Leads Connecting VHF and UHF AntennasAntennas with 75-ohm Round Leads Connecting Cable TVSeparate VHF and UHF Antennas Cable without a Cable BoxConnecting to a Cable Box that Descrambles Some Channels Connecting to a Cable Box that Descrambles All ChannelsInstall AT I O N Unplug the cable or antenna from the back of the TV Connecting a VCRConnecting an S-VHS VCR Make sure the jacks you are using are underneath the numberConnecting a Second VCR to Record from the TV Connecting a DVD Player 480i/480pConnecting a Digital TV Set-Top Box 480p/1080i Connecting a Camcorder Installing Batteries in the Remote Control Turning the TV On and Off Plug & Play FeatureIf you want to reset this feature Viewing the Menus Viewing the Menus and On-Screen DisplaysViewing the Display Selecting a Menu Language Memorizing the Channels Selecting the Video Signal-sourceStoring Channels in Memory Automatic Method Press the VOL+ button Adding and Erasing Channels Manual MethodChanging Channels Adjusting the VolumeLabeling the Channels Setting the Clock Press the Menu button to display menu Customizing the PictureUsing Automatic Picture Settings Customizing the Sound Using Automatic Sound Settings Press the CH button to select TV/AV Viewing an External Signal SourceSetting Up Your Remote Control to Operate Your VCR or DVD Customizing Your Remote ControlDVD Codes VCR CodesCable Box Setting Up Your Remote Control to Operate Your Cable BoxCodes Fine Tuning Channels Alternate between On and Off LNA Low Noise AmplifierTilt DNIeTM Digital Natural Image engine Digital Noise Reduction CL32Z7H/CL32Z6H Changing the Screen SizePress the CH button to select Color Tone Changing the Color ToneFreezing the Picture Using the R.Surf FeatureSetting the On/Off Timer Press the VOL + button to select On/Off Setting the Sleep TimerChoosing a Multi-Channel Sound MTS Soundtrack Just press the MTS button on the remote controlBBE BBE Viewing Closed Captions Activating Picture-in-Picture Viewing Picture-in-PicturePress the VOL + button to select PIP On Selecting a Signal Source External A/V for PIPChanging the Size of the PIP Window Swapping the Contents of the PIP image and Main image Changing the PIP Channel Viewing the Demonstration Chapter Five Identifying ProblemsUsing Your TV in Another Country Cleaning and Maintaining Your TVSpecifications M O M O Appendix A.4