Special VCR Playback Features
Auto Play
PLAY
0:00:00 SP
Press the DISPLAY button to see the current status of the VCR deck, as well as the tape counter position and record speed.
SELECT
DVD | VCR | FM/AM | INPUT |
3 | DISPLAY | CLEAR | 3 |
|
| DISC | |
| SETUP |
| |
|
| ENU | |
|
|
| M |
While a videotape is playing, you can enjoy a variety of special playback features, including Still, Frame Advance, Skip, Repeat, and more. Press the Play button again to resume normal playback.
1Still
From Play mode, press Play/Pause to still a single frame.
2Frame Advance
From still mode, rotate JOG DIAL to advance to the next frame.
3Cue/Review
From Play mode, press F.Forward (❿❿) or Rewind (➛➛) to cue/review at two speeds:
•Picture Search — Press and release to advance the tape forward or backward at 5 times normal speed.
•Jet Search — Press and hold to advance the tape forward or backward at 7 times normal speed.
4Repeat
From Play mode, press Repeat to review the last 5 seconds of tape (SP mode).
5Shuttle
From Play mode, Shuttle FWD gradually increases the cue speed from slow to Picture Search to Jet Search
If you want your videotapes to play automatically when you insert them, turn on Auto Play.
NOTE: Only tapes that are missing the Record Safety Tab will play automatically when inserted.
1Open the “SETUP MENU”
With the DVD in stop mode, press the SETUP button.
2Select “VCR”
Using the up/down and left/right buttons, move the selection arrow to “VCR Function Setup,” then press ENTER to select.
3Select “Auto Play”
Move the selection arrow to “Auto Play,” then press right to select from the following options:
•On - The VCR will automatically begin playing a video tape when it is inserted, as long as the safety tab of the cassette has been removed.
•Off - Auto play is disabled.
4Tape Length
Press the left button to select the video cassette length.
This information is usually printed on the tape box. The menu cycles through: T120, T160 or T180. Once the type of cassette is set, the VCR can display the amount of time remaining on the tape when you press the DISPLAY button.
5Auto Repeat
In the VCR Function Setup “Auto Repeat” sets the VCR to
play a tape repeatedly [unless a tape control is activated (stop, fast forward or rewind)].
|
| MAIN MENU | |
DVD | VCRVCR | Options | Language |
Program | Clock | Install | Exit |
| VCR Function Setup |
|
|
| |
| RETURN | ❷ | ENTER | ||
|
|
|
|
| |
|
|
|
|
| |
| VCR FUNCTION SETUP | ||||
| Tape Length | T120 |
|
| On |
| Auto Play | ➛ ❿ On |
|
| |
|
|
| Off | ||
| Auto Repeat | Off |
|
| |
| RETURN | ❷ |
|
|
|
|
|
|
|
|
|
Tracking Adjusting Picture Alignment Automatically
REPEAT 100+ | 0 | ZOOM | STEP | |
ANGLE | ATR |
| ||
|
|
|
| 2 |
TV VOL. | 1 | CH/TRK |
| AMP |
|
|
|
| |
| TV |
| TV INPUT |
|
1
DVD | VCR | FM/AM | INPUT |
The Tracking adjustment removes the white lines that sometimes appear during playback because of slight differences in recording decks. The TRK button will automatically align the recorded tracks with the playback heads to solve this problem. You may also set tracking manually.
1Adjust Tracking Manually
During playback, press the TRK or TRK ❷ buttons to move the white lines out of the picture.
2Ajust Tracking Automatically
If you press the ATR key on the remote control during VCR playback, the tracking on the VCR will be set automatically.
S-VHS Playback
The DVD-VCR allows you to playback high quality S-VHS tapes.
1Insert a
Insert an
2Start Playback
Press Play/Pause on the remote control to begin playback of the S- VHS tape.
40
41