Lanzar Car Audio 1200, 2651D, 1601D, 2051D, 1055D, 1201D Maxpi ZOO Mono Block Amplifier Applications

MAXPI ZOO MONO BLOCK AMPLIFIER APPLICATIONS

Basic application

Interconnect cable checklist:

-Connect the line inputs to a Radio/CD RCA outputs or line output of the full range primary amplifier with good quality RCA cables. A "Y" adapter may be needed as shown in the diagram.

-Use at least 16 gauge speaker wiring. These amplifiers have dual speaker terminals, simplifying the hookup of multiple speakers

Crossover frequency control checklist:

-LOWPASS: 35Hz to 250Hz

-SUBSONIC: 15Hz to 35Hz

-BASS EO: 0 to 1OdB

-PHASE: 0 to 180 degrees

Level control checklist:

-Refer to the section 'Settingup systems after installation for best performance-

Minimum final loudspeaker impedance:	Dual Subwoofer Application
- 1 ohm.

/------------------,

I	FULL RANGE		I
	STEREO UNE INPUT
	---C:	Y-ADAPIOR
\		o	I
		NOT USED
	0	----+
	~		I
	------------------~

*Note: You can use the Radio/CD designated mono line output or a full range stereo line output. For full range stereo line output, you will need an optional 'Y-Adaptor"as shown

-_.

--TOM.nmn'+I2V

II CHAllIS GIIOWm