~PI055D/~PI201D/~PI601D/~P2051D/~P2651D
~P2055D MONO BLOCK CLASS D AMPLIFIER APPLICATIONS
Basic application
Interconnect cable checklist:
-Connect the line inputs to a Radio/CD RCA outputs or line output of the full range primary amplifier with good quality RCA cables.
A "Y" adaper may be needed as shown in the diagram.
-Use at least 16 gauge speaker wiring. These amplifiers have dual speaker terminals, simplifYing the hookup of multiple speakers
Crossover frequency control checklist:
-lOWPASS: 35Hz to 250Hz
-SUBSONIC: 15Hz to 35Hz
-BASS EO: 0 to 10dB
-PHASE: 0 to 180 degrees
level control checklist:
-Refer to the section 'Setting up systems after installation for best performance"
Minimum final loudspeaker impedance:
,
I | FULL RANGE | I |
| STEREO LINE INPUT |
|
=NOTUSED
\--------- '"
*Note: You can use the Radio/CD designated mono line output or a full range stereo line output. For full range stereo line output, you will need an optional
nl!RBJU1I1!
. """'" a
Dual Subwoofer Application
_ 0
8UBWOOFER
TOBATTERY+1JV
w" ....
"'CAR.,....
AUTO ANTENNA
....
........SUIIWOOFER........
..00
SUIIWOOFER
~
- 4