Samsung DVD-V4600 Receiver Connections Deck Control Buttons, Basic DVD Operation

A/V Receiver Connections Deck Control Buttons

To take full advantage of the movie theater experience that DVD offers, you may want to connect your DVD­ VCR to a complete Surround Sound system, including an A/V Receiver and six Surround Sound speakers.

Before You Begin...

•If your A/V receiver is equipped with a Dolby Digital Decoder, you have the option to bypass the DVD-VCR’s built-in Dolby Digital Decoder. Use the Digital Audio Out connection below.

To Digital Audio Input of an A/V

Receiver with a Dolby Digital Decoder

1Digital Audio Out

Connect a digital coaxial cable from the Digital Audio Out jack on the rear panel of the DVD-VCR to the corresponding Digital Audio Input jack on your A/V Receiver:

•Coaxial

•Use whichever connection is available on your A/V Receiver.

The DVD-VCR uses one set of controls to operate both decks. The following buttons are helpful in successfully controlling each deck.

1POWER Button

Press the POWER button on the remote control or front panel to turn on the DVD-VCR.

2DVD Button

Press the DVD button on the remote control or front panel when you want to control the DVD deck.

•The DVD indicator will light on the Front Panel Display to show that the DVD deck is selected.

3VCR Button

Press the VCR button on the remote control or front panel when you want to control the VCR deck.

•The VCR indicator will light on the Front Panel Display to show that the VHS deck is selected.

4INPUT SEL. Button

Press the INPUT SEL. button repeatedly to cycle through all of your input sources, including the Tuner(Ch##), Line 1 (rear AV input), and Line 2 (front AV input).

•Input selection is only available when the VCR deck is selected.

Basic DVD Operation

Follow the instructions below to playback a DVD.

1Open the Disc Tray

Press the OPEN/CLOSE button on your remote control or on the front panel of the unit to turn on the power and open the disc tray.

2Insert a Disc

Put a disc in the center of the tray, with the label- printed side facing up.

3Close the Disc Tray

Press the OPEN/CLOSE button on your remote control or on the front panel of the unit to close the disc tray.

4Play a DVD

Press the ❿ll(PLAY/PAUSE) button on your remote control or on the front panel of the unit.

•Most discs will start to playback as soon as the tray closes.

•If a DVD has a MENU, the menu may pop up on TV screen.

5Additional DVD Options

•See pages 14 ~ 20 for advanced DVD Setup options.

•See pages 21 ~ 27 for special DVD Playback features.

ENG-9