Samsung DVD-V4600 Front Panel Display, Insert Batteries into Remote, Basic Connections/Auto Setup

Page 7

Front Panel Display

 

1

2

3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4

5

1When the light is on, DVD is operating.

2The time, counter position, time remaining or current deck status is indicated.

3VCR is activated.

4DVD or CD media is loaded.

5VHS videotape is loaded.

Insert Batteries into Remote

Remove the battery cover on the remote

Insert two 1.5V “AAA” batteries as shown, making sure of the correct polarities(+/-)

Slide the cover back onto remote.

Basic Connections/Auto Setup

You will need to connect the DVD-VCR to a TV and run Auto Setup. The Auto Setup will automatically search for channels and then set your DVD-VCR's internal clock.

NOTES:

• See page 7 for Advanced Connections.

1Connect the RF Antenna Cable to your DVD-VCR Connect an external indoor/outdoor antenna or wall outlet antenna cable to the Ant-In jack on the rear panel.

LINE INPUT

2Connect your DVD-VCR to a TV

RF Connection

Using the RF antenna cable, connect the OUT jack (TO TV) on the rear panel of your DVD-VCR to your TV’s Antenna Input.

Line Connection

Using an RCA-type audio/video cable(red, white, yellow), connect the LINE OUT jacks on the rear panel of your DVD-VCR to your TV's Line In jacks. Use the three cables as follows: red for right audio, white for left audio, and yellow for video.

To enjoy DVD-VCR, you must connect the RCA Cableand RF antenna Cable.

To view DVD-VCR, you must select “Line input” mode on your TV.

REMARK : You cannot watch the DVD-VCR through the RF connection. The RF out sends antenna and cable signals only.

3Plug In

Your DVD-VCR's power should be plugged into a standard 120V/60Hz wall outlet. Avoid pressing any buttons on the remote control or on the unit during an Auto Setup. While your DVD-VCR is running an Auto Setup, “AUTO” will blink. When Auto Setup is complete, the current time will be displayed on the front panel displayed. In case Auto Clock set fails to locate a channel to set the clock, you should set the clock manually. See page 11.

3

4Turn On your DVD-VCR

Turn on the power by pressing the POWER button on the remote control or on the front panel of the unit.

5Turn On your TV

Turn on the TV by pressing the POWER button on the TV remote control.

6Set the TV to Line

Set your TV to its Line Input.

ENG-6

Image 7
Contents DVD-V4600 Remote Control Overview Important Safety Instructions Safety InstructionsTable of Contents Disc Type and Characteristics Feature SummaryRear Panel Front Panel OverviewUnpack See page 7 for Advanced Connections Basic Connections/Auto SetupFront Panel Display Insert Batteries into RemoteVideo/Component Video Connections for DVD Stereo ConnectionsMonitor TV Connections Connecting Other Video EquipmentBasic DVD Operation Receiver Connections Deck Control ButtonsBefore You Begin On-Screen Menu Navigation Basic VCR Operation Basic TV Tuner OperationsMenu Language Manual Clock Set Select Ant./Cable Tuner Band Setting Auto Channel MemoryWith the DVD in Stop or Play mode, press the Menu button Select ChannelSelect Channel to Add/Delete Channel Add/DeleteFront Panel Dimmer Select Channel Add/DeleteSelect Disc Menu Auto Power Off Disc Menu LanguageSet Auto Power Off Select DVDSet Subtitle Language Preference Audio Language Subtitle LanguageSelect Audio Select SubtitleSet Digital Output Digital OutputSet DTS Set Dynamic Compression Off When a 96K disc is played, 96K will be outputtedDynamic Compression PCM Down SamplingSet Black Level TV Aspect Ratio Black LevelSelect Display Set TV AspectAlt Video Out Interlace Interlaced Scan mode will workSet Alt Video Out Not all discs are rated ParentalDisc Menu Navigation Special Playback FeaturesEZ View Select Chapter or Track Title/Chapter/Time SelectionView the Display Select titleAngle View Subtitle To B Repeat Repeat Chapter/Title AudioBookmarks Use this feature to check your DVD Special VCR Playback FeaturesFunction DVD Tracking Auto Play VHS Playback Variable Search SystemDVD-VCR allows you to playback high quality S-VHS tapes Before You Begin Power on the DVD-VCR Power on the TV Basic Recording Special Recording FeaturesOne-Touch Recording OTR How to Set a Timer RecordingRecord Speed How to Set a Timer Recording Function VCR Inputs Technical SpecificationsSamsung Combination DVD & VCR Samsung Electronics AMERICA, INC