Samsung DVD-V9700 instruction manual Connecting to a TV Progressive, ENG-16

C O N N E C T I O N S

Connecting to a TV (Progressive)

1

Using Component video cables (not included), connect the COMPONENT VIDEO OUT jacks on the rear of the DVD-VCR to the COMPONENT IN jacks of your TV.

2

Using the audio cables, connect from the AUDIO OUT or LINE OUT AUDIO (red and white) jacks on the rear of the DVD-VCR to the AUDIO (red and white) IN jacks of your TV.

Turn on the DVD-VCR and TV.

3

With the unit in Stop mode, set the video output to P-SCANby pressing the P.SCAN button on the front panel until the Progressive Scan mode prompt screen appears. Then press ENTER and progressive will be output.

White

Red	Green Blue Red
Audio Cable	Component Cable
	(not included)
Red White Red	Blue Green

4

Press the input selector on your TV remote control until the Component signal from the DVD-VCR appears on the TV screen.

To see the progressive video output,

-Consult your TV User’s Manual to find out if your TV supports Progressive Scan.

If Progressive Scan is supported, follow the TV User’s Manual regarding Progressive Scan settings in the TV’s menu system.

-Depending on your TV, the connection method may differ from the illustration above.

Note

What is "Progressive Scan"?

Progressive scan has twice as many scanning lines as the interlace output method. Progressive scanning method provides better and clearer picture quality.

The Component Video jacks only output video from the DVD player. To view video from the VCR, you must have the Video/Line Out (yellow) jack connected.

Only the 480p output resolution is possible with Component.

ENG-16