DVD O P E R AT I O N S
Audio Options
Dolby Digital Out
- PCM: Converts to PCM(2CH) audio.
- Bitstream: Outputs Dolby Digital via the digital output.
DTS
- Off : Does not output a digital signal
- On: Outputs DTS Bitstream Digital via digital output only. Select DTS when connecting to a DTS Decoder.
Dynamic Compression
- On: When the movie- soundtracks are played at low volume or from smaller speakers, the system can
apply appropriate compression
to make 
intelligible and prevent dramatic
passages from getting too loud.
-Off: To select the standard range.
PCM Down Sampling
- On: Select this when the Amplifier connected to the player is not 96KHz compatible. In this case, the 96KHz signals will be converted down to 48KHZ.
-Off: Select this when the Amplifier connected to the player is 96KHz compatible. In this case, all signals will be output without any changes.
Manufactured under license from Dolby Laboratories. “Dolby” and the
“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
Note
There is no analog audio output when you set DTS to on.
▼ - Dynamic compression restrains the dynamic range of the sound, i.e. the difference between the loud and quiet passages of a DVD audio track. This is useful when watching a DVD late at night.
Note
Even when PCM Down sampling is Off, some discs will only output down sampled audio through the digital outputs.