Samsung DVD-V9700 instruction manual Using the Tape Counter, ENG-69, When you are ready

VCR O P E R AT I O N S

Using the Tape Counter

The tape counter:

-Indicates the elapsed time in the play and record modes (hours, minutes and seconds).

-Is reset when a cassette is inserted in the DVD-VCR.

-Allows you to easily find the beginning of a sequence.

-If the remaining time is to be calculated correctly, you must indicate the type of cassette being used.

1

Insert a cassette in your DVD- VCR. To set the tape counter to zero at the beginning of a sequence:

- Press the INFO. button twice to display the counter

-Press the CLEAR button when you want to set the tape counter to zero.

2

When you are ready,

- Start playback or recording. - Press the (Stop) button. - To fast-forward or rewind to the sequence at which the

counter was set to zero, press the the / (Forward) or

/ (Rewind) buttons on the remote control.

-Some DVD-VCR information, such as the counter, can be displayed on the television screen.

Press the INFO. button:

-Once to display the current function, recording speed and counter.

-Twice to display the counter only.

-Three times to display the time remaining on the cassette.

-Four times to clear the display.

ENG-69