Samsung BD-P1400 user manual Connecting to a TV with DVI Cable

connections

CONNECTING TO A TV WITH DVI CABLE

1.Using the HDMI-DVI cable (not included), connect the HDMI OUT terminal on the rear of the Blu-ray Disc Player to the DVI IN terminal of your TV.

2.Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the Blu-ray Disc Player to the AUDIO (red and white) IN terminals of your TV.

Turn on the Blu-ray Disc Player and TV.

3.Press the input selector on your TV remote control until the DVI signal from the Blu-ray Disc Player appears on your TV screen.

•If you have set the remote control to properly operate with your TV (see pages 18~19), press the TV INPUT SEL. button on the remote control and select HDMI as the external source of the TV.

Connecting the HDMI cable while the Blu-ray player's power is on, the player's video output will automatically change to HDMI mode (see page 40).

M Depending on your TV, certain HDMI output resolutions may not work.

Please refer to the user's manual of your TV.

If an HDMI or HDMI-DVI cable is plugged into TV, the Blu-ray Disc Player’s output is set to HDMI/DVI automatically within 10 seconds.

If Component and HDMI are both connected, HDMI mode is automatically selected. (See page 40)

When you connect the player to the TV using the HDMI cable for the first time or to a new TV, the HDMI output resolution will be automatically set to the highest provided by the TV

If the HDMI cable is connected or removed during playback of a CDDA, MP3 or JPEG file, the player will stop playing.

Audio Cable

HDMI-DVI cable

(not included)

Red White

22_ connections