Samsung CL-34M30HS, CL-29M30HS, CL-29Z30HS Connecting to a Cable Box that Descrambles All Channels

Page 13

I N S TA L L AT I O N

Connecting to a Cable Box that Descrambles All Channels

1

Find the cable that is connected to the ANTENNA OUT terminal on your cable box.

2

Connect the other end of this cable to the “ANT IN” terminal on the rear panel.

œThis terminal might be labeled “ANT OUT”, “VHF OUT” or simply, “OUT”.

Connecting to a Cable Box that Descrambles Some Channels

If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths of coaxial cable. (These items are available at most electronics stores.)

1

Find and disconnect the cable that is connected to the ANTENNA IN terminal on your cable box.

œThis terminal might be labeled “ANT IN”, “VHF IN” or simply, “IN”.

2

Connect this cable to a two-way splitter.

Incoming Cable

Splitter

3

 

Connect a coaxial cable

 

between an OUTPUT

Incoming Cable

terminal on the splitter

 

and the IN terminal on the

Splitter

cable box.

Cable Box

continued...

English - 13

Image 13
Contents Owner’s Instructions English Your New TV InstallationOperation Troubleshooting Special FeaturesAppendix Accessories List of FeaturesFamiliarizing Yourself with The TV Audio Input Connection Jacks Side´ Video Input Video InputAudio Input jacks Connection Jacks Rear´ Video Input jack Audio-Video Output jacksMode Remote Control¨ Number buttons +100VCR/DVD Controls ˛ TV/COMPONENTAntennas with 300-ohm Flat Twin Leads Connecting VHF and UHF AntennasPlug the adaptor into the ANT in terminal on the rear panel Antennas with 75-ohm Round Leads Connecting Cable TVSeparate VHF and UHF Antennas Cable without a Cable BoxConnecting to a Cable Box that Descrambles Some Channels Connecting to a Cable Box that Descrambles All ChannelsCable Box Switch TV Rear Panel Connecting a VCRConnecting a Second VCR to Record from the TV Connecting to Y, PB, PR Connecting a DVD PlayerConnecting a Digital TV Set-Top Box TV Side Panel Connecting a CamcorderConnecting to an Analog Amplifier Installing Batteries in the Remote Control Press the Power button on the remote control Plug & Play FeatureTurning the TV On and Off Message Plug & Play is displayedExit Viewing the Menus Viewing the Menus and On-Screen DisplaysViewing the Display Selecting a Menu Language Memorizing the Channels Selecting the Video Signal-sourceStoring Channels in Memory Automatic Method Adding and Erasing Channels Manual Method Using the Number Buttons Using the Channel ButtonsUsing the PRE-CH Button to Select the Previous Channel Changing Channels√ button Labeling the ChannelsClock 10 30 am Setting the ClockPicture Control Using Automatic Picture SettingsCustomizing the Picture Press the or button to select Color tone Resetting the Picture Settings to the Factory DefaultsUsing the Mute Button Adjusting the VolumeSound Control Press the œ or √ button to Using Automatic Sound SettingsSelect a particular item Customizing the Sound Setting the Signal Source Viewing an External Signal SourceSet other signal sources AV1, AV2, AV3, S-Video Assigning Names to External Input ModePress the œ or √ button to adjust the fine tuning Fine Tuning ChannelsPress the or button to select Fine tune Changing the Screen Size depending on the model Digital Noise Reduction Tilt Again to set the timer Using the R.Surf FeatureFreezing the Picture Press the R.SURF buttonChoosing a Multi-Channel Sound MTS track Press the or button to select Auto volume Auto VolumeSetting the Surround Setting the Turbo Sound Press the … or † button to select On Timer Setting the On/Off TimerSetting the Sleep Timer Press the œ or √ button to adjust volume level Setting the Preferred Volume Level and ChannelViewing Closed Captions On-Screen Text Messages Press the or button to select ModePress the œ or √ button to select the channel to be locked Locking the ChannelSetting the On/Off Melody Customizing Your Remote Control Remote Control Codes VCR Codes Cable Box Codes DVD Codes Problem Possible Solution Identifying ProblemsUsing Your TV in Another Country Cleaning and Maintaining Your TVSpecifications This page is intentionally Left blank Country Customer Care Center Web Site Contact Samsung WORLD-WIDE