Samsung CL-29Z30HS, CL-29M30HS manual Memorizing the Channels, Selecting the Video Signal-source

O P E R AT I O N

Memorizing the Channels

Your TV can memorize and store all of the available channels for both “off-air” (antenna) and cable channels. After the available channels are memorized, use the CH and CH buttons to scan through the channels. This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels (automatic) and adding and deleting channels (manual).

Selecting the Video Signal-source

Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e., an antenna or a cable system).

1

Press the MENU button.

Press the ▲ or ▼ button to select “Channel”, then press the ENTER button.

Channel

Auto program		√
Add/Delete		√
Fine tune	:	00
Air/CATV	:	Air
Name	:	- - - -

Move Enter Return

2

Press the ▲ or ▼ button to select “Air/CATV”.

3

Press the œ or √ button to select “Air” (antenna), “STD”, “HRC”, or “IRC” (all cable TV).

Channel

	Auto program				√
	Add/Delete				√
	Fine tune		:	00
	Air/CATV		œ	Air	√
	Name		: - - - -
Move		Adjust		Return

Channel

	Auto program				√
	Add/Delete				√
	Fine tune		:	00
	Air/CATV		œ	Air	√
	Name		: - - - -
Move		Adjust		Return

œSTD, HRC and IRC identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area.

continued...

English - 26